Go to homepage
Menu

Shortcuts

media portal Editorial use

Tags

pH Sensor SE555 ORP

Latest Posts

Combined pH- and ORP-Sensor SE555X/*-AMSN

Jun 2022 Process Analytics pH Sensor SE555 ORP
media portal Editorial use

The chemical and food industries require the highest quality and safety from their processes, both in terms of production and the treatment of the resulting wastewater. A smooth production process in real time is ensured through the use of appropriate process sensors. 

With the SE555X/*-AMSN sensor, Knick presents a solution for the combined measurement of pH and ORP in demanding applications. Bringing pH and ORP measurements together in a single sensor provides the user with greater flexibility. At the same time, the sensor requires little maintenance and is also suitable for inline measurements in tough environments.

Combined Measurement of pH and ORP with just one Sensor

The SE555X/*-AMSN sensor unites Knick’s SE555 pH and SE565 ORP sensors in one measurement sequence. The combination saves space in the production environment, as just one installation location is required. The sensor also reduces the amount of additional equipment required, such as cables, fittings, or transmitters.

The combined pH and ORP sensor is based on the SE555 pH sensor, in which an additional platinum disk embedded in the side of the glass shaft enables measurement of ORP. ORP sensors are used to detect the presence of redox-active reactants. Platinum is recommended as an electrode material for this purpose, since precious metals do not interfere with the redox process themselves. Platinum is also strongly resistant to aggressive media, allowing the sensor to also be used in challenging processes such as chlor-alkali electrolysis or in chemical wastewater.

Flexible and space-saving Sensor

The SE555X/*-AMSN was developed for the demanding requirements in the chemical industry, the food sector, and for hygienic applications. This results in a wide range of potential applications. The sensor can be used as required – the user can use both the pH and the ORP values for process monitoring and control, or just one of these measuring parameters can be used for this purpose.

Latest Posts

SE605H Conductivity Sensor with CondCheck
Mar 2025
Process Analytics
  Pharma, Sensor, Conductivity
Stack and String Voltage Measurement in Electrolyzers and Fuel Cells
Sept 2024
Interface Technology
  Hydrogen
New 30 mV Shunt Resistors for Knick Transducers
Sept 2024
Interface Technology
Innovations at InnoTrans 2024 for rolling stock and DC traction power supply
Sept 2024
Interface Technology
  Exhibition, InnoTrans
ACHEMA 2024 - Review and Impressions
Jul 2024
Process Analytics
  Achema

Assigned Products

SE555 pH/ORP Sensor | Memosens | 120 mm | Ex | CIP/SIP capable | Sterilizable | For aggressive media
SE555 pH/ORP Sensor | Memosens | 120 mm | Ex | CIP/SIP capable | Sterilizable | For aggressive media
Product number:

SE555X/1-AMSN

Related Posts

SE605H conductivity sensor with CondCheck: Integrated sockets for connecting a resistance decade

Mar 2025

Process Analytics

Pharma, Sensor, Conductivity

SE605H Conductivity Sensor with CondCheck
The SE605H conductivity sensor with CondCheck enables USP 645 verification without interrupting the measuring chain.
Knick’s large, international team at its ACHEMA 2024 trade fair booth.

Jul 2024

Process Analytics

Achema

ACHEMA 2024 - Review and Impressions
A brief cinematic retrospective of our trade fair booth, Knick’s international team, and a successful booth party.

Feb 2024

Process Analytics

Uniclean700, Launch

Uniclean 700 Series - Modular control system for automated sensor cleaning
With the Uniclean 700 series, Knick is introducing a modular control system, that can be installed very quickly and cost-effectively as a flexible entry-level solution for automated sensor cleaning.

Apr 2023

Process Analytics

Launch, Fitting, WA111

Robust WA111 Retractable Fitting Made of Plastic for Highly Corrosive Operating Conditions
The plastic WA111 retractable fitting is a robust and cost-effective solution for corrosive processes and environments. It is equipped with a secure lock function and multiple nozzles for thorough sensor cleaning.

Apr 2023

Process Analytics

Launch, Fitting, WA155

Successful joint project : Knick developed the special Ceramat WA 155 retractable fitting for optical probes from SOPAT
In cooperation with SOPAT, Knick developed a special Ceramat fitting for optical probes for automatic cleaning in fouling processes.

Apr 2023

Process Analytics

Conductivity, Phamacy, pH

pH and conductivity measurement in vaccine production
Pharmaceutical contract manufacturer relies on Knick's transmitters for modular production plants for Covid-19 vaccines.

Apr 2023

Process Analytics

Sensor, Conductivity, SE625

Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium
The SE625 ensures reliable and accurate determination of the conductivity of ultrapure water in the semiconductor industry.

Jan 2023

Process Analytics

ARD75

Sensor Adapter with Lock Function Enables Safe and Thorough Cleaning
Sensor adapter with locking gate for safety and thorough cleaning of sensors in the immersion fitting ARD75 without the need

Nov 2022

Process Analytics

Protos II 4400, Module

Up to six Sensors on one Transmitter Protos II 4400 via Modul MSU4400-180
Users can now connect up to six Memosens sensors simultaneously.

Aug 2022

Process Analytics

Achema, Exhibition

ACHEMA 2022 - Knick at the world forum for the process industry
In August 2022, the international process industry met at the ACHEMA. Knick presented the cCare system and industrial applications in a new concept.

Jun 2022

Process Analytics

Sensor, pH, SE555, ORP

Combined pH- and ORP-Sensor SE555X/*-AMSN
Combined pH and ORP measurement in one sensor SE555 saves place and equipment costs for demanding requirements in the chemical industry, the food sector and for hygienic applications.

Apr 2022

Process Analytics

MemoTrans

Ultra Compact Transmitter for Memosens Sensors
The new ultra compact MemoTrans MT201 transmitter plugs directly onto the Memosens sensor in the fitting and communicates via 4-20 mA HART protocol.

Feb 2022

Process Analytics

Protos II 4400, Stratos Multi, Software, ProgaLog

Conveniently configure transmitters offline on a PC - ProgaLog 4000
Conveniently configure all flexibly configurable Stratos Multi and Protos II 4400 transmitters offline, save settings, duplicate for further transmitters, and create documentation for audits.

Feb 2022

Process Analytics

Stratos Multi, Transmitter

New Stratos Multi E461N transmitter with Profinet
The interface enables continuous communication of process variables and predictive maintenance from the field level to all common process control systems.

Jan 2022

Process Analytics

Memosens

Memosens 2.0: Evolution of digital data transfer
As one of the two initiators of Memosens, Knick is constantly developing the technology.

Nov 2021

Process Analytics

Sensor, Conductivity, Ex, SE656, SE655

SE655X Digital and SE656X Digital - Digital Conductivity Sensors with Ex Certification
The SE655X digital and SE656X digital conductivity sensors with Memosens protocol are now also available with Ex certification.

Nov 2021

Process Analytics

Exhibition, Switzerland, Ilmac

ILMAC 2021 in Basel - Trade Show Review by Knick Schweiz AG
Knick Schweiz AG exhibited at ILMAC in Basel and gives a brief review of what it's like to have finally met customers at the show again.

Oct 2021

Process Analytics

Stratos Multi, Transmitter, Ex

Stratos Multi E401X- Multiparameter Transmitter for Hazardous Locations
The new Multiparameter Transmitter Stratos Multi E401X can now also be used in hazardous locations, installed in Ex Zone 2.

May 2021

Process Analytics

Transmitters, Stratos Multi

Stratos Multi E471 with EtherNet/IP for process optimization
EtherNet/IP communication protocol allows the transmitter to be easily integrated into Industrial Ethernet networks as PCS.

May 2021

Process Analytics

Sensor, Conductivity, Launch, SE656

New SE656N digital conductivity sensor
New toroidal Digital Conductivity Sensor with a large measuring range and consisting of PFA for using in aggressive media

Mar 2021

Process Analytics

Protos II 4400, Profinet

Transmitter for the process industry with PROFINET module
The PROFINET industrial Ethernet standard is becoming an increasingly important aspect of process engineering in the “Industry 4.0” environment.

Jul 2020

Process Analytics

Launch, Fitting, ARD170

High-quality immersion fitting for mobile applications
ARD 170 enables measurements even in deep water

Jul 2020

Process Analytics

Fitting, ARD50, ARD75

Modular immersion fitting as an electrically conductive variant
Knick is expanding its portfolio of fittings for liquid analysis with additional electrically conductive (EL) variants.

Apr 2020

Process Analytics

Launch, Transmitters, Stratos Multi

New multiparameter transmitter Stratos Multi
Knick is launching the the next generation in its Stratos analyzer product line.

Feb 2018

Process Analytics

Sensor, Fitting

How to get the sensor into the process
Sensors as the direct interface to the process must be exactly matched to the chemistry of the measured medium and to the prevailing pressure and temperature conditions.

Apr 2017

Process Analytics

MemoRail Modbus

Powerful compact analyzer boosts performance while reducing costs
It has long been common practice when taking pH/ORP, conductivity, and oxygen measurements that a fixed analyzer be mounted near the sensor. The analyzer serves several purposes.

Feb 2017

Process Analytics

Conductivity

High-Precision Conductivity Measurement at Extreme Temperature Differences
Pharmaceutical manufacturer, EVER Pharma Jena uses the extremely robust conductivity sensors SE605(H) and SE680 with Memosens technology from Knick.

Nov 2016

Process Analytics

Transmitter, FF, Profibus, HART

The Big Three of the Process Industry: HART, FF, Profibus
Our Knick multi-parameter analyzers are now available with Profibus and FF interfaces. Even for hazardous areas.