Electrical measurement and process analytics for hydrogen production
Hydrogen is currently in the spotlight as an energy and storage medium. Knick products optimize hydrogen production in the process and in electrolyser operation. How this works was presented by two of our experts at the virtual H2 Forum 2021 at the end of April.
Green hydrogen is the energy technology of the future
In the future, hydrogen will make an important contribution to a sustainable energy supply. Renewable energies from wind, sun and biogas are often available when they are not needed. Many wind turbines are even shut down when the wind situation is good and they could be operating most efficiently. The problem is oversupply and weak power grids that cannot adequately draw and transport the energy.
Storage technology is needed and batteries have major disadvantages in terms of durability and the components that are not infinitely available and are difficult to recycle. Without storage technology for the “green” energy, there will always be a gap in the energy supply that will have to be filled with climate-damaging fossil fuels. Many experts therefore believe that green hydrogen is the solution, and the German government is promoting the development of hydrogen and fuel cell technologies to stay ahead of the innovation competition.
H2 Forum – Green Hydrogen 2025
On 27 and 28 April 2021, a virtual conference for energy suppliers, automotive and industrial companies, technology manufacturers and research institution took place, at which Knick was represented by two conference speakers. The online event brought together decision-makers, experts and solution providers around the future of green hydrogen. Expert presentations and a virtual product exhibition invited discussion and networking. On April 27, 2021, Joachim Baumann, Sales Director Interface Technology talked about current and high voltage measurements on electrolysis cells. On the second day, Dr. Michael Kogej spoke in a pitch about process analysis in hydrogen production.
Eventdetails and Conference Agenda
Electrical measurement technology for electrolysis cells
Electrolysers are independent systems in which hydrogen is produced by electrolysis using direct current. With such systems, renewable energy can be converted into hydrogen directly at the point of generation. Electrolysers consist of stacks (electrolysis cell packages) of a water treatment unit, a gas treatment unit and the power electronics including measurement technology, control and interface management. Ideally, all modules are integrated in a ready-to-connect container and can then be installed directly at wind farms, solar farms or biogas plants.
Precise measurement of system parameters such as current, voltage and temperature directly at the electrolyzes are general requirements for safe operation in the electrolytic production of hydrogen. Regardless of the type of conversion process, the operators place extremely high value on reliability and demand a long service life.
With the Knick ProLine P40000 product range, we offer you solutions with an individual choice of measuring ranges. Extremely high MTBF values of > 2000 years calculated from products in service are proof of the reliability. The isolating amplifiers for current and voltage measurement can be used in systems with up to 2200VDC. Together with P41000 and one MACONIC shunt resistor we can precisely measure current up to 20000A
Knick Interface products are known for
- high accuracy (low linearity and gain errors)
- low temperature coefficient
- very high common mode rejection and
- good dynamic behavior
Knick process analytics for hydrogen production
Although process analytics equipment seems to be inappropriate in hydrogen generation, it is nonetheless very important for technical and efficiency reasons.
An indisputable fact is water electrolysis as the main source for hydrogen gas. Actually, most of the generated hydrogen uses fossil sources. By developing and optimizing electrolysis techniques these processes will be more or less obsolete in the near future. The main source for clean and green hydrogen is water. This ubiquitous substance must have a high purity to be used for that purpose.
The measurement system STRATOS MULTI in combination with the conductivity sensor SE605(H) guarantees high quality water.
The STRATOS MULTI monitors the water quality online and directly displays/transfers the measurement value to the control system. Many more benefits are given by this system:
- Easy and intuitive handling
- Digital Memosens inductive sensor connection for preventing electrostatic influences
- Multichannel and multiparameter ability for measurement point optimization (e. g. conductivity, pH…)
- Diagnostic functions for optimized maintenance
- Traffic light system for easy user information
- Reliable and repeatable measurements
- Compact and robust design
The conductivity sensor SE605(H) is specially designed for conductivity measurements in pure/ultra-pure water. The digital Memosens protocol is implemented inside the sensor head so that precalibrated sensors can be used shortly after installation and connection to the measurement system STRATOS MULTI.
- Digital Memosens inductive sensor connection for preventing electrostatic influences
- Easy and intuitive handling
- Precalibration function optimized maintenance
- Process connections: DN25 socket, Clamp 1.5“
Latest Posts
Related Posts
Sept 2024
Interface Technology
Stack and String Voltage Measurement in Electrolyzers and Fuel Cells
Sept 2024
Interface Technology
New 30 mV Shunt Resistors for Knick Transducers
Sept 2024
Interface Technology
Innovations at InnoTrans 2024 for rolling stock and DC traction power supply
May 2022
Interface Technology
Energy storage - the handshake between renewable energy and electric vehicles
Feb 2022
Interface Technology
P52000VPD voltage presence detector reliably detects voltages up to 4200 V DC
Sept 2021
Interface Technology
Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo
May 2021
Interface Technology
Quadruple Standard Signals in Just One Signal Conditioner
Apr 2021
Interface Technology
Electrical measurement and process analytics for hydrogen production
Mar 2021
Interface Technology
Condition Monitoring of High-Voltage Motors
Mar 2021
Interface Technology
Pulse frequency conditioner for speed sensors
Nov 2020
Interface Technology
Worldwide smallest transducer up to ±2200 V
Aug 2020
Interface Technology
Importance of broad-range power supplies for DC electrical measurement
Jul 2020
Interface Technology
Measuring Photovoltaic Degradation
Jun 2020
Interface Technology
Electrical Measurement Solutions: Control from 480 to 4800 Volts
Jun 2020
Interface Technology
Benefits of High Voltage Transducers versus Instrument Transformers
Nov 2019
Interface Technology
Shunt Resistor versus Hall Effect Technology
Mar 2018
Interface Technology
MTBF beyond 3000 years: A snap hook for your plant
Jan 2018
Interface Technology
Knick Products Comply With UL - What Does That Mean?
Nov 2017
Interface Technology
High-voltage transducer offers more safety on railway vehicles
Feb 2017
Interface Technology
True RMS Measurement with P41000TRMS
Feb 2017
Interface Technology