Transmitters Stratos Multi

Stratos Multi E471 with EtherNet/IP for process optimization

May 2021 Process Analytics Transmitters Stratos Multi

media portal Editorial use

The , part of the proven 4-wire product line, has now been equipped with an EtherNet/IP communication protocol. This allows it to be easily integrated into Industrial Ethernet networks and just as easily configured in the process control system (PCS).

All production processes require continuous monitoring and control by a process control system

“Industry 4.0” , i.e., the networking of sensors and controllers, is of central importance in the process industry and in automation engineering. Particularly in the case of high-throughput processes and critical parameters for plant safety and quality, relevant measured values must be determined in real time and transmitted to the control system, allowing the controller to react quickly if required. The Stratos Multi E471 EtherNet/IP with multiparameter functionality can be flexibly deployed worldwide in combination with process control systems from any relevant supplier, such as Honeywell or Rockwell/Allen Bradley. It can transmit measured values, e.g., pH, oxygen concentration, or conductivity, as well as calibration values with zero point, slope, and diagnostic data directly to the process control system. The diagnostic data includes Sensoface, wear, remaining lifetime, operating time, calibration timer, SIP and CIP counters. Both standard diagnostic data as specified by the ODVA® (Open DeviceNet Vendor Association) and the extended diagnostic data from the sensor and transmitter (NAMUR NE 107) are transmitted to the PCS.

Predictive Maintenance for Process Analytics

CIP/SIP and autoclaving counter, sensor diagram, and remaining sensor service life can be used by process management for predictive maintenance with optimized intervals. With seamless real-time transmission of device and sensor data to the process control system, the Stratos Multi E471 is a considerable asset to plant optimization and efficiency.

Feb 2024

Process Analytics

Uniclean700, Launch

Uniclean 700 Series - Modular control system for automated sensor cleaning

With the Uniclean 700 series, Knick is introducing a modular control system, that can be installed very quickly and cost-effectively as a flexible entry-level solution for automated sensor cleaning.

Apr 2023

Process Analytics

Launch, Fitting, WA111

Robust WA111 Retractable Fitting Made of Plastic for Highly Corrosive Operating Conditions

The plastic WA111 retractable fitting is a robust and cost-effective solution for corrosive processes and environments. It is equipped with a secure lock function and multiple nozzles for thorough sensor cleaning.

Apr 2023

Process Analytics

Launch, Fitting, WA155

Successful joint project : Knick developed the special Ceramat WA 155 retractable fitting for optical probes from SOPAT

In cooperation with SOPAT, Knick developed a special Ceramat fitting for optical probes for automatic cleaning in fouling processes.

Apr 2023

Process Analytics

Conductivity, Phamacy, pH

pH and conductivity measurement in vaccine production

Pharmaceutical contract manufacturer relies on Knick's transmitters for modular production plants for Covid-19 vaccines.

Apr 2023

Process Analytics

Conductivity, Sensor, SE625

Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium

The SE625 ensures reliable and accurate determination of the conductivity of ultrapure water in the semiconductor industry.

Jan 2023

Process Analytics

ARD75

Sensor Adapter with Lock Function Enables Safe and Thorough Cleaning

Sensor adapter with locking gate for safety and thorough cleaning of sensors in the immersion fitting ARD75 without the need

Nov 2022

Process Analytics

Protos II 4400, Module

Up to six Sensors on one Transmitter Protos II 4400 via Modul MSU4400-180

Users can now connect up to six Memosens sensors simultaneously.

Aug 2022

Process Analytics

Exhibition, Achema

ACHEMA 2022 - Knick at the world forum for the process industry

In August 2022, the international process industry met at the ACHEMA. Knick presented the cCare system and industrial applications in a new concept.

Jun 2022

Process Analytics

pH, Sensor, SE555, ORP

Combined pH- and ORP-Sensor SE555X/*-AMSN

Combined pH and ORP measurement in one sensor SE555 saves place and equipment costs for demanding requirements in the chemical industry, the food sector and for hygienic applications.

Apr 2022

Process Analytics

MemoTrans

Ultra Compact Transmitter for Memosens Sensors

The new ultra compact MemoTrans MT201 transmitter plugs directly onto the Memosens sensor in the fitting and communicates via 4-20 mA HART protocol.

Feb 2022

Process Analytics

Protos II 4400, Stratos Multi, Software, ProgaLog

Conveniently configure transmitters offline on a PC - ProgaLog 4000

Conveniently configure all flexibly configurable Stratos Multi and Protos II 4400 transmitters offline, save settings, duplicate for further transmitters, and create documentation for audits.

Feb 2022

Process Analytics

Stratos Multi, Transmitter

New Stratos Multi E461N transmitter with Profinet

The interface enables continuous communication of process variables and predictive maintenance from the field level to all common process control systems.

Jan 2022

Process Analytics

Memosens

Memosens 2.0: Evolution of digital data transfer

As one of the two initiators of Memosens, Knick is constantly developing the technology.

Nov 2021

Process Analytics

Conductivity, Sensor, Ex, SE656, SE655

SE655X Digital and SE656X Digital - Digital Conductivity Sensors with Ex Certification

The SE655X digital and SE656X digital conductivity sensors with Memosens protocol are now also available with Ex certification.

Nov 2021

Process Analytics

Exhibition, Switzerland, Ilmac

ILMAC 2021 in Basel - Trade Show Review by Knick Schweiz AG

Knick Schweiz AG exhibited at ILMAC in Basel and gives a brief review of what it's like to have finally met customers at the show again.

Oct 2021

Process Analytics

Stratos Multi, Transmitter, Ex

Stratos Multi E401X- Multiparameter Transmitter for Hazardous Locations

The new Multiparameter Transmitter Stratos Multi E401X can now also be used in hazardous locations, installed in Ex Zone 2.

May 2021

Process Analytics

Transmitters, Stratos Multi

Stratos Multi E471 with EtherNet/IP for process optimization

EtherNet/IP communication protocol allows the transmitter to be easily integrated into Industrial Ethernet networks as PCS.

May 2021

Process Analytics

Launch, Conductivity, Sensor, SE656

New SE656N digital conductivity sensor

New toroidal Digital Conductivity Sensor with a large measuring range and consisting of PFA for using in aggressive media

Mar 2021

Process Analytics

Protos II 4400, Profinet

Transmitter for the process industry with PROFINET module

The PROFINET industrial Ethernet standard is becoming an increasingly important aspect of process engineering in the “Industry 4.0” environment.

Jul 2020

Process Analytics

Launch, Fitting, ARD170

High-quality immersion fitting for mobile applications

ARD 170 enables measurements even in deep water

Jul 2020

Process Analytics

Fitting, ARD50, ARD75

Modular immersion fitting as an electrically conductive variant

Knick is expanding its portfolio of fittings for liquid analysis with additional electrically conductive (EL) variants.

Apr 2020

Process Analytics

Launch, Transmitters, Stratos Multi

New multiparameter transmitter Stratos Multi

Knick is launching the the next generation in its Stratos analyzer product line.

Feb 2018

Process Analytics

Fitting, Sensor

How to get the sensor into the process

Sensors as the direct interface to the process must be exactly matched to the chemistry of the measured medium and to the prevailing pressure and temperature conditions.

Apr 2017

Process Analytics

MemoRail Modbus

Powerful compact analyzer boosts performance while reducing costs

It has long been common practice when taking pH/ORP, conductivity, and oxygen measurements that a fixed analyzer be mounted near the sensor. The analyzer serves several purposes.

Feb 2017

Process Analytics

Conductivity

High-Precision Conductivity Measurement at Extreme Temperature Differences

Pharmaceutical manufacturer, EVER Pharma Jena uses the extremely robust conductivity sensors SE605(H) and SE680 with Memosens technology from Knick.

Nov 2016

Process Analytics

Transmitter, FF, Profibus, HART

The Big Three of the Process Industry: HART, FF, Profibus

Our Knick multi-parameter analyzers are now available with Profibus and FF interfaces. Even for hazardous areas.

All Blogposts

Stratos Multi E471 with EtherNet/IP for process optimization

All production processes require continuous monitoring and control by a process control system

Predictive Maintenance for Process Analytics

Latest Posts

Related Posts

Uniclean 700 Series - Modular control system for automated sensor cleaning

Robust WA111 Retractable Fitting Made of Plastic for Highly Corrosive Operating Conditions

Successful joint project : Knick developed the special Ceramat WA 155 retractable fitting for optical probes from SOPAT

pH and conductivity measurement in vaccine production

Sturdy 2-Electrodes Conductivity Sensor SE625 with Coaxial Electrodes made of Titanium

Sensor Adapter with Lock Function Enables Safe and Thorough Cleaning

Up to six Sensors on one Transmitter Protos II 4400 via Modul MSU4400-180

ACHEMA 2022 - Knick at the world forum for the process industry

Combined pH- and ORP-Sensor SE555X/*-AMSN

Ultra Compact Transmitter for Memosens Sensors

Conveniently configure transmitters offline on a PC - ProgaLog 4000

New Stratos Multi E461N transmitter with Profinet

Memosens 2.0: Evolution of digital data transfer

SE655X Digital and SE656X Digital - Digital Conductivity Sensors with Ex Certification

ILMAC 2021 in Basel - Trade Show Review by Knick Schweiz AG

Stratos Multi E401X- Multiparameter Transmitter for Hazardous Locations

Stratos Multi E471 with EtherNet/IP for process optimization

New SE656N digital conductivity sensor

Transmitter for the process industry with PROFINET module

High-quality immersion fitting for mobile applications

Modular immersion fitting as an electrically conductive variant

New multiparameter transmitter Stratos Multi

How to get the sensor into the process

Powerful compact analyzer boosts performance while reducing costs

High-Precision Conductivity Measurement at Extreme Temperature Differences

The Big Three of the Process Industry: HART, FF, Profibus