P27000 Universal Isolated Signal Conditioner | Calibrated switching of 480 input and output ranges | Isolation up to 1000 V
Product number:
P27000
Description
P27000 Universal Isolated Signal Conditioner | Calibrated switching of 480 input and output ranges | Isolation up to 1000 V
The "Multimeter" among the signal conditioners. With 480 switchable calibrated ranges and broad-range power supply.
- Flexible and extremely precise
Calibrated range selection without complicated readjustments - Broad-range power supply
20 … 253 V AC/DC - Compact design
12.5 mm modular housing; up to 80 active isolators per meter of mounting rail - Quick and easy configuration
Housing can be easily opened - Pluggable screw terminals
Simple, time-saving assembly and prewiring of enclosures - 3-port separation
Protection against incorrect measurements or damage - Maximum accuracy
- Specific test report
Following EN 10204 2.2 - Protective separation
According to EN 61140. Protection against unacceptably high voltages (for example, with shunt measurements at high potentials or in 3-phase systems) - Maximum reliability
No repair and failure costs - 5-year warranty
The isolation amplifiers provide safe galvanic isolation for any input signals from ±20 mV to ±200 V and from ±0.1 mA to ±100 mA.
We look forward to hearing from you!
Contact Us
| Function: | Current and voltage measurement |
|---|---|
| Input: | 0 ... (±)0.1 mA up to 0 ... (±)100 mA, 0 ... (±)10 V, 0 ... (±)20 mA, 0 ... (±)20 mV up to 0 ... (±)200 V, 4 ... 20 mA |
| Output: | 0 ... (±)10 V, 0 ... (±)20 mA, 4 ... 20 mA |
| Isolation AC/DC: | up to 1,000 V |
| Test Voltage: | 5 kV AC |
| Power Supply: | 22 ... 230 V AC/DC |
| Cutoff Frequency: | Switchable cutoff frequency 10 kHz or 10 Hz, other cutoff frequency on request |
| Ambient operating temperature: | –10 ... 70 °C |
| Dimensions (W x L x H): | 12.5 x 99 x 111 mm |
| Special features: | Calibrated switching of 480 input and output ranges using DIP switches, The "Multimeter" among the signal conditioners |
| Product Category: | Isolated Signal Conditioner |
Downloads
Manuals
Certificates
Our service
Relevant Blog Posts
Apr 2023
Process Analytics
Robust WA111 Retractable Fitting Made of Plastic for Highly Corrosive Operating Conditions
The plastic WA111 retractable fitting is a robust and cost-effective solution for corrosive processes and environments. It is equipped with a secure lock function and multiple nozzles for thorough sensor cleaning.
Apr 2023
Process Analytics
Successful joint project : Knick developed the special Ceramat WA 155 retractable fitting for optical probes from SOPAT
In cooperation with SOPAT, Knick developed a special Ceramat fitting for optical probes for automatic cleaning in fouling processes.
Jul 2020
Process Analytics
High-quality immersion fitting for mobile applications
ARD 170 enables measurements even in deep water
Jul 2020
Process Analytics
Modular immersion fitting as an electrically conductive variant
Knick is expanding its portfolio of fittings for liquid analysis with additional electrically conductive (EL) variants.
Feb 2018
Process Analytics
How to get the sensor into the process
Sensors as the direct interface to the process must be exactly matched to the chemistry of the measured medium and to the prevailing pressure and temperature conditions.