Go to homepage
Show all categories Sensors Back

SE655 Toroidal Conductivity Sensor | Memosens | 3 m Fixed cable | PEEK | High chemical resistance

Cable
Explosion protection
Signal Transmission
Product number: SE655N-GEFFT0AM
Description Technical details Downloads Use cases Blog posts

Description

SE655 Toroidal Conductivity Sensor | Memosens | 3 m Fixed cable | PEEK | High chemical resistance

Universal and precise conductivity sensor with high chemical resistance. Digital with Memosens protocol.

  • Process-wetted material: PEEK
  • Sturdy design
  • Resistant to contamination and fouling
  • Range of six decades
  • Steam sterilizable and CIP capable
  • Inductive measuring principle, full galvanic isolation of sensor coils from process medium 
  • Digital with Memosens protocol

The SE655N digital toroidal conductivity sensor is a sturdy and corrosion-resistant sensor that, thanks to its high chemical resistance, is particularly suitable for applications in the chemical industry.

A combination of a large sensor opening and dirt-repellent material prevents blockages and deposits in media with a high pollution degree. The inductive measuring principle enables full galvanic isolation of the measurement from the medium.

The sensor is an all-rounder, suitable for a multitude of applications with a range covering six decades. Equipped with Memosens protocol as a digital version, it offers considerable process and data security, and ensures reliable data recording. Also for hazardous areas (SE655X-GEFTT0AM).

Applications
Concentration measurement of acids and bases, online quality monitoring of chemical products in tanks and pipes, phase separation of product mixtures, paper manufacturing (high fiber concentration), heavily soiled media and wastewater, fouling and oil-contaminated media, brine, regeneration of ion exchangers.

 

 

 

We look forward to hearing from you!
Contact Us

Technical details

Measurement Parameter: Conductivity (inductive)
Measurement error: ± (0.005 mS/cm + 0.5 % meas. value) | (- 20 ... 100 °C), ± (0.010 mS/cm + 0.5 % meas. value) | (> 100 °C)
Mounting: G ¾"
Explosion protection: non Ex
Process Connection: G 3/4" (36-mm nut and FKM (Viton) gasket included in shipment)
Measuring Range: 0 ... 2,000 mS/cm
Temperature Detector: Pt1000 (Class A in acc. with IEC 60751)
Measuring Principle: Inductive
Relative process pressure: 0 ... 20 bar (see pressure/temperature diagram)
Fixed cables with ferrules: 3 m
Protection: IP 68 (sensor mounted, with original gasket / EN 60529)
Temp. response time t90: Approx. 7 min
Ambient temperature: –20 ... +60 °C
Storage temperature: –20 ... 80 °C
Cell factor: 1.98/cm (≥30 mm wall clearance)
Signal Transmission: Memosens Protocol
Resolution: 0.002 μS/cm

Downloads

Manuals

[13989] User Manual
SE655(N/X-*) / SE656(N/X-*)
Digital Toroidal Conductivity Sensor

Brochures

[13395] Brochure
Sensors - For measuring pH/ORP, conductivity or oxygen. Digital or analog.

Data Sheets

[16521] Data sheet
SE655(N/X) Toroidal Conductivity Sensor
Product Description | Specifications | Product Range

Certificates

[14511] EU Declaration of Conformity (DE, EN, FR)
No. EU220118A | 2022-01-18
Digital Sensors, non Ex

Our service

Used in Process or Applications

Monitoring Brewing Processes
The taste and quality of beer are highly dependent on the quality of the water used for brewing it. It is determined by pH and conductivity measurements.
Flue Gas Scrubbing in Sludge Incineration
Toxic sludge that must be treated for phosphorus recovery is produced in biological wastewater treatment plants.
Pulp and Paper Production
Many measuring loops in pulp production are located in environments in which technical personnel must spend as little time as possible.

Related Products

SE600 4-Electrode Conductivity Sensor | Fixed cable | For high pressure/high-temperature
SE600 4-Electrode Conductivity Sensor | Fixed cable | For high pressure/high-temperature
Product number:

SE600

SE603 4-Electrode Conductivity Sensor | Fixed cable | Very high corrosion resistance
SE603 4-Electrode Conductivity Sensor | Fixed cable | Very high corrosion resistance
Product number:

SE603

SE604 2-Electrode Conductivity Sensor | 7-Pole | Measuring range from 1 nS/cm to 1000 μS/cm
SE604 2-Electrode Conductivity Sensor | 7-Pole | Measuring range from 1 nS/cm to 1000 μS/cm
Product number:

SE604

SE604 2-Electrode Conductivity Sensor | Memosens | Ex | Measuring range from ultrapure water to 500 μS/cm
SE604 2-Electrode Conductivity Sensor | Memosens | Ex | Measuring range from ultrapure water to 500 μS/cm
Product number:

SE604X-MS

SE604 2-Electrode Conductivity Sensor | Memosens | Measuring range from ultrapure water to 500 μS/cm
SE604 2-Electrode Conductivity Sensor | Memosens | Measuring range from ultrapure water to 500 μS/cm
Product number:

SE604-MS

SE605H 2-Electrode Conductivity Sensor | Memosens | Clamp | Ex | Hygienic design
SE605H 2-Electrode Conductivity Sensor | Memosens | Clamp | Ex | Hygienic design
Product number:

SE605H-XMSJ

SE610 2-Electrode Conductivity Sensor | Fixed cable | For measuring low conductivities in water
SE610 2-Electrode Conductivity Sensor | Fixed cable | For measuring low conductivities in water
Product number:

SE610

SE615 Conductivity Sensor | 2 Graphite electrodes | Memosens | 120 mm | For water and wastewater treatment
SE615 Conductivity Sensor | 2 Graphite electrodes | Memosens | 120 mm | For water and wastewater treatment
Product number:

SE615/1-MS

SE615 Conductivity Sensor | 2 Graphite electrodes | Memosens | 225 mm | For water and wastewater treatment
SE615 Conductivity Sensor | 2 Graphite electrodes | Memosens | 225 mm | For water and wastewater treatment
Product number:

SE615/2-MS

SE620 2-Electrode Conductivity Sensor | VP | Pharma compliant hygienic design
SE620 2-Electrode Conductivity Sensor | VP | Pharma compliant hygienic design
Product number:

SE620/1

SE625 2-Electrode Conductivity Sensor | Memosens | Measuring range 0 … 1,000 μS/cm
SE625 2-Electrode Conductivity Sensor | Memosens | Measuring range 0 … 1,000 μS/cm
Product number:

SE625-MS

SE630 Conductivity Sensor | 2 Graphite electrodes | Memosens | NPT 1 | Measurement of conductivities up to 20 mS/cm
SE630 Conductivity Sensor | 2 Graphite electrodes | Memosens | NPT 1 | Measurement of conductivities up to 20 mS/cm
Product number:

SE630N-N1MSYB0M

SE655 Toroidal Conductivity Sensor | Fixed cable | Ex | PEEK | High chemical resistance
SE655 Toroidal Conductivity Sensor | Fixed cable | Ex | PEEK | High chemical resistance
Product number:

SE655X

SE655 Toroidal Conductivity Sensor | Fixed cable | PEEK | High chemical resistance
SE655 Toroidal Conductivity Sensor | Fixed cable | PEEK | High chemical resistance
Product number:

SE655

SE655 Toroidal Conductivity Sensor | Memosens | 3 m Fixed cable | PEEK | High chemical resistance
SE655 Toroidal Conductivity Sensor | Memosens | 3 m Fixed cable | PEEK | High chemical resistance
Product number:

SE655N-GEFFT0AM

SE655 Toroidal Conductivity Sensor | Memosens | 7 m Fixed cable | Ex | PEEK | High chemical resistance
SE655 Toroidal Conductivity Sensor | Memosens | 7 m Fixed cable | Ex | PEEK | High chemical resistance
Product number:

SE655X-GEFTT0AM

SE655 Toroidal Conductivity Sensor | Memosens | 7 m Fixed cable | PEEK | High chemical resistance
SE655 Toroidal Conductivity Sensor | Memosens | 7 m Fixed cable | PEEK | High chemical resistance
Product number:

SE655N-GEFTT0AM

SE656 Toroidal Conductivity Sensor | Fixed cable | Ex | PFA | Resistant to highly oxidizing media
SE656 Toroidal Conductivity Sensor | Fixed cable | Ex | PFA | Resistant to highly oxidizing media
Product number:

SE656X

SE656 Toroidal Conductivity Sensor | Fixed cable | PFA | Resistant to highly oxidizing media
SE656 Toroidal Conductivity Sensor | Fixed cable | PFA | Resistant to highly oxidizing media
Product number:

SE656

SE656 Toroidal Conductivity Sensor | Memosens | Fixed cable | Ex | PFA | Resistant to highly oxidizing media
SE656 Toroidal Conductivity Sensor | Memosens | Fixed cable | Ex | PFA | Resistant to highly oxidizing media
Product number:

SE656X -GEFTW0KM

SE656 Toroidal Conductivity Sensor | Memosens | Fixed cable | PFA | Resistant to highly oxidizing media
SE656 Toroidal Conductivity Sensor | Memosens | Fixed cable | PFA | Resistant to highly oxidizing media
Product number:

SE656N -GEFTW0KM

SE660 Electrodeless Conductivity Sensor
SE660 Electrodeless Conductivity Sensor
Product number:

SE660/11

SE670 Toroidal Conductivity Sensor | Coupling nut G 1 1/2“ | PP | Insensitive to contamination and corrosion
SE670 Toroidal Conductivity Sensor | Coupling nut G 1 1/2“ | PP | Insensitive to contamination and corrosion
Product number:

SE670/U1

SE680 Digital Toroidal Conductivity Sensor | Clamp 2" | Ex | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
SE680 Digital Toroidal Conductivity Sensor | Clamp 2" | Ex | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
Product number:

SE680X-J2N4U00M

SE680 Digital Toroidal Conductivity Sensor | Clamp 2" | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
SE680 Digital Toroidal Conductivity Sensor | Clamp 2" | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
Product number:

SE680N-J2N4U00M

SE680 Digital Toroidal Conductivity Sensor | Dairy pipe DN 50 | Ex | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
SE680 Digital Toroidal Conductivity Sensor | Dairy pipe DN 50 | Ex | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
Product number:

SE680X-C1N4U00M

SE680 Digital Toroidal Conductivity Sensor | Dairy pipe DN 50 | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
SE680 Digital Toroidal Conductivity Sensor | Dairy pipe DN 50 | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
Product number:

SE680N-C1N4U00M

SE680 Digital Toroidal Conductivity Sensor | For ARD 75 | Ex | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
SE680 Digital Toroidal Conductivity Sensor | For ARD 75 | Ex | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
Product number:

SE680X-KUN4U00M

SE680 Digital Toroidal Conductivity Sensor | For ARD 75 | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
SE680 Digital Toroidal Conductivity Sensor | For ARD 75 | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
Product number:

SE680N-KUN4U00M

SE680 Digital Toroidal Conductivity Sensor | For ARF 210/215 | Ex | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
SE680 Digital Toroidal Conductivity Sensor | For ARF 210/215 | Ex | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
Product number:

SE680X-K8N4U00M

SE680 Digital Toroidal Conductivity Sensor | For ARF 210/215 | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
SE680 Digital Toroidal Conductivity Sensor | For ARF 210/215 | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
Product number:

SE680N-K8N4U00M

SE680 Digital Toroidal Conductivity Sensor | SMS 2" | Ex | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
SE680 Digital Toroidal Conductivity Sensor | SMS 2" | Ex | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
Product number:

SE680X-M2N4U00M

SE680 Digital Toroidal Conductivity Sensor | SMS 2" | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
SE680 Digital Toroidal Conductivity Sensor | SMS 2" | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
Product number:

SE680N-M2N4U00M

SE680 Digital Toroidal Conductivity Sensor | Varivent DN 50 | Ex | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
SE680 Digital Toroidal Conductivity Sensor | Varivent DN 50 | Ex | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
Product number:

SE680X-V1N4U00M

SE680 Digital Toroidal Conductivity Sensor | Varivent DN 50 | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
SE680 Digital Toroidal Conductivity Sensor | Varivent DN 50 | FDA-approved PEEK | Measuring range 0 … 2000 mS/cm
Product number:

SE680N-V1N4U00M

Relevant Blog Posts

Sept 2024

Interface Technology

Hydrogen

Stack and String Voltage Measurement in Electrolyzers and Fuel Cells
Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers

Sept 2024

Interface Technology

New 30 mV Shunt Resistors for Knick Transducers

Knick is expanding the accessory range for its high-voltage transducers with immediate effect by adding shunt resistors with a 30 mV voltage drop
Innovations at InnoTrans 2024

Sept 2024

Interface Technology

Exhibition, InnoTrans

Innovations at InnoTrans 2024 for rolling stock and DC traction power supply
At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications

Dec 2023

Company

|

Interface Technology

|

Process Analytics

Knick Austria - direct customer contact in Austria from 2024
Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

May 2022

Interface Technology

Energy

Energy storage - the handshake between renewable energy and electric vehicles
Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

Feb 2022

Interface Technology

P52000VPD, Voltage

P52000VPD voltage presence detector reliably detects voltages up to 4200 V DC
The new P52000VPD voltage presence detector reliably monitors areas with high voltages and sends a signal to the downstream plant control system when a specified threshold value is reached.

Sept 2021

Interface Technology

USA, Exhibition

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo
Knick will be showcasing high-voltage electrical measurement and signal conversion products.

May 2021

Interface Technology

Quadruple Standard Signals in Just One Signal Conditioner
The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

Apr 2021

Interface Technology

Hydrogen

Electrical measurement and process analytics for hydrogen production
Knick products optimize hydrogen production in the process and in electrolyser operation.

Mar 2021

Interface Technology

High-Voltage Transducer, USA, P44000

Condition Monitoring of High-Voltage Motors
Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

Mar 2021

Interface Technology

Pulse frequency conditioner for speed sensors
The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

Nov 2020

Interface Technology

High-Voltage Transducer, Voltage, P42000D2

Worldwide smallest transducer up to ±2200 V
The P40000 series from Knick enables reliable voltage measurements from ±50 mV to ±3600 V and current measurements from ±100 mA to ±20 kA.

Aug 2020

Interface Technology

DC

Importance of broad-range power supplies for DC electrical measurement
Many DC electrical measurement products manufactured by Knick contain universal, also known as broad-range, power supplies.

Jul 2020

Interface Technology

High-Voltage Transducer, DC, P29000

Measuring Photovoltaic Degradation
Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

Jun 2020

Interface Technology

High-Voltage Transducer, USA

Electrical Measurement Solutions: Control from 480 to 4800 Volts
Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

Jun 2020

Interface Technology

High-Voltage Transducer

Benefits of High Voltage Transducers versus Instrument Transformers
When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

Nov 2019

Interface Technology

DC, USA, Current

Shunt Resistor versus Hall Effect Technology
There are many systems where measurement of large DC currents are needed for performance and safety.

Mar 2018

Interface Technology

MTBF beyond 3000 years: A snap hook for your plant
Failure of equipment on the plant floor can lead to considerable and costly disruption.

Jan 2018

Interface Technology

UL

Knick Products Comply With UL - What Does That Mean?
There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

Nov 2017

Interface Technology

High-Voltage Transducer, P50000

High-voltage transducer offers more safety on railway vehicles
The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

Feb 2017

Interface Technology

P41000TRMS

True RMS Measurement with P41000TRMS
Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

Feb 2017

Interface Technology

P22400, SIL

Functional safety and maximum availability can go together
The requirements on operational and safety-related circuits are continuously growing.