Go to homepage
Show all categories Transmitters Back

MemoRail A1401 Compact Multiparameter Transmitter | Memosens Sensors | 2x 4…20 mA Active Output | 24 V DC Power Supply

Explosion protection
Current outputs
Power Supply:
Product number: A1401N-P1-20
Description Technical details Downloads Use cases Blog posts

Description

MemoRail A1401 Compact Multiparameter Transmitter | Memosens Sensors | 2x 4…20 mA Active Output | 24 V DC Power Supply

MemoRail A 1401 is the first genuinely compact, digital analyzer for measuring pH/ORP, conductivity, oxygen and temperature with Memosens and digital sensors. 

Two analog active 4 ... 20 mA outputs supply the measured values for the process variable and temperature to the process control system or a PLC.

Plug & Measure 
Pre-calibrated Memosens sensors reduce operating costs and maximize the availability of the measuring point.

Memosens 
Optimum availability of the measuring point is achieved by using pre-calibrated sensors with contactless Memosens technology. Calibration is no longer carried out on site but under reproducible conditions in the lab using the new MemoSuite software tool. Individual sensor data are always directly assigned to each Memosens sensor. Problems at the connector involving humidity, corrosion or even defective galvanic isolation are a thing of the past.

Compact 
The highly space-saving modular housing of the MemoRail devices is only 12.5 mm wide.

Cost-Efficient
The outstanding properties of MemoRail enable the implementation of measuring stations with low overall costs, especially in combination with modern Memosens sensors specially tailored for use with MemoRail.

Universal Use
MemoRail A1401 is an attractively priced solution in process analytics and optimally suited for use in numerous industry segments, such as chemicals, pharmaceuticals, biotechnology, food and beverage, or energy.
With its narrow modular housing, MemoRail A1401 is perfectly suited to installation in restricted spaces – e.g, in control cabinets, fermenters or in process plants.

  • 2 current outputs: 4 to 20 mA (active)
  • 24 V DC power supply (via plug-in terminals or DIN rail bus connector)
  • Space-saving modular housing, 12.5 mm wide
  • Multiparameters: measurement of pH/ORP, conductivity, oxygen and temperature
  • Memosens communication
  • Simple configuration via DIP switches

 

MemoSuite – The Software Tool

Fast and User-Friendly 
The MemoSuite software allows calibrating Memosens sensors under reproducible conditions in the lab. MemoLink connects the sensors to the PC. On-site calibration under adverse ambient conditions is no longer necessary. The only thing required there is the quick and uncomplicated replacement of the used sensors with pre-calibrated sensors.

Two Versions 
MemoSuite Basic and MemoSuite Advanced meet different application-specific requirements:

MemoSuite Basic 
calibrates Memosens sensors.

MemoSuite Advanced 
not only performs a calibration, but also provides diagnostics and database documentation of the sensors. The database meets the requirements of GMP and FDA CFR 21 Part 11.

We look forward to hearing from you!
Contact Us

Technical details

2- or 4-wire: 4 Wire
Channels: 1 channel
Communication (Output, Digital): Analog 4-20 mA
Measurement Parameter: pH/ORP, Multiparameter, Oxygen, Conductivity
Sensor Connection: Memosens
permanently installed / portable: permanently installed
Current outputs: 2x 4 … 20 mA, active
Explosion protection: non Ex
Enclosure: PA 66
Product Line: MemoRail

Downloads

Manuals

[166] User Manual
MemoRail A 1401
Version 02

Brochures

[13209] Brochure
Memosens - The complete solution for smart sensor applications.

Data Sheets

[14392] Data sheet
MemoRail A1401
Product Description | Specifications | Product Range

Our service

Used in Process or Applications

Combined Cycle Power Plants
Measurement of pH values, dissolved oxygen, and conductivity in boiler feed water, steam, and condensate in combined gas turbines in power plants.
Monitoring CIP/SIP Processes
Reliable conductivity measurement for extreme temperature differences in CIP/SIP processes

Related Products

MemoRail A1401 Compact Multiparameter Transmitter | Memosens Sensors | 1x 4…20 mA Active Output | 24 V DC Power Supply
MemoRail A1401 Compact Multiparameter Transmitter | Memosens Sensors | 1x 4…20 mA Active Output | 24 V DC Power Supply
Product number:

A1401N-P1-10

MemoRail A1401 Compact Multiparameter Transmitter | Memosens Sensors | Ex | 1x 4…20 mA Passive Output | 24 V DC Power Supply
MemoRail A1401 Compact Multiparameter Transmitter | Memosens Sensors | Ex | 1x 4…20 mA Passive Output | 24 V DC Power Supply
Product number:

A1401B-P1-30

Portavo 904X MULTI Portable Multiparameter Transmitter | Memosens Sensors | Ex Zone 0/1 | Data Logger
Portavo 904X MULTI Portable Multiparameter Transmitter | Memosens Sensors | Ex Zone 0/1 | Data Logger
Product number:

904XMULTI

Portavo 907 MULTI COND Portable Multiparameter Transmitter | Memosens Sensors | Analog Conductivity Sensors | Data Logger | Add-On Functions
Portavo 907 MULTI COND Portable Multiparameter Transmitter | Memosens Sensors | Analog Conductivity Sensors | Data Logger | Add-On Functions
Product number:

907MULTICond

Portavo 907 MULTI OXY Portable Multiparameter Transmitter | Memosens Sensors | Optical Oxygen Sensors | Data Logger | Add-On Functions
Portavo 907 MULTI OXY Portable Multiparameter Transmitter | Memosens Sensors | Optical Oxygen Sensors | Data Logger | Add-On Functions
Product number:

907MULTIOxy

Portavo 907 MULTI PH Portable Multiparameter Transmitter | Memosens Sensors | Analog pH Sensors | Data Logger | Add-On Functions
Portavo 907 MULTI PH Portable Multiparameter Transmitter | Memosens Sensors | Analog pH Sensors | Data Logger | Add-On Functions
Product number:

907MULTIpH

Portavo 907 Multichannel MS Portable Multiparameter Transmitter | Memosens Sensors | Multichannel Function | Data Logger | Add-On Functions
Portavo 907 Multichannel MS Portable Multiparameter Transmitter | Memosens Sensors | Multichannel Function | Data Logger | Add-On Functions
Product number:

907MULTICHANNELMS

Portavo 908 MULTI Portable Multiparameter Transmitter | Memosens Sensors | Data Logger | GLP Compliance | Direct Printer Control
Portavo 908 MULTI Portable Multiparameter Transmitter | Memosens Sensors | Data Logger | GLP Compliance | Direct Printer Control
Product number:

908MULTI

Protos II 4400 C Modular Multiparameter-Transmitter | Wide Sensor Selection | Corrosion-Proof Coating | 4-Wire | Broad-Range Power Supply
Protos II 4400 C Modular Multiparameter-Transmitter | Wide Sensor Selection | Corrosion-Proof Coating | 4-Wire | Broad-Range Power Supply
Product number:

4400 C

Protos II 4400 S Modular Multiparameter-Transmitter | Wide Sensor Selection | Hygienic Surface | 4-Wire | Broad-Range Power Supply
Protos II 4400 S Modular Multiparameter-Transmitter | Wide Sensor Selection | Hygienic Surface | 4-Wire | Broad-Range Power Supply
Product number:

4400 S

Relevant Blog Posts

Sept 2024

Interface Technology

Hydrogen

Stack and String Voltage Measurement in Electrolyzers and Fuel Cells
Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers

Sept 2024

Interface Technology

New 30 mV Shunt Resistors for Knick Transducers

Knick is expanding the accessory range for its high-voltage transducers with immediate effect by adding shunt resistors with a 30 mV voltage drop
Innovations at InnoTrans 2024

Sept 2024

Interface Technology

Exhibition, InnoTrans

Innovations at InnoTrans 2024 for rolling stock and DC traction power supply
At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications

Dec 2023

Company

|

Interface Technology

|

Process Analytics

Knick Austria - direct customer contact in Austria from 2024
Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

May 2022

Interface Technology

Energy

Energy storage - the handshake between renewable energy and electric vehicles
Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

Feb 2022

Interface Technology

P52000VPD, Voltage

P52000VPD voltage presence detector reliably detects voltages up to 4200 V DC
The new P52000VPD voltage presence detector reliably monitors areas with high voltages and sends a signal to the downstream plant control system when a specified threshold value is reached.

Sept 2021

Interface Technology

USA, Exhibition

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo
Knick will be showcasing high-voltage electrical measurement and signal conversion products.

May 2021

Interface Technology

Quadruple Standard Signals in Just One Signal Conditioner
The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

Apr 2021

Interface Technology

Hydrogen

Electrical measurement and process analytics for hydrogen production
Knick products optimize hydrogen production in the process and in electrolyser operation.

Mar 2021

Interface Technology

High-Voltage Transducer, USA, P44000

Condition Monitoring of High-Voltage Motors
Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

Mar 2021

Interface Technology

Pulse frequency conditioner for speed sensors
The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

Nov 2020

Interface Technology

High-Voltage Transducer, Voltage, P42000D2

Worldwide smallest transducer up to ±2200 V
The P40000 series from Knick enables reliable voltage measurements from ±50 mV to ±3600 V and current measurements from ±100 mA to ±20 kA.

Aug 2020

Interface Technology

DC

Importance of broad-range power supplies for DC electrical measurement
Many DC electrical measurement products manufactured by Knick contain universal, also known as broad-range, power supplies.

Jul 2020

Interface Technology

High-Voltage Transducer, DC, P29000

Measuring Photovoltaic Degradation
Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

Jun 2020

Interface Technology

High-Voltage Transducer, USA

Electrical Measurement Solutions: Control from 480 to 4800 Volts
Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

Jun 2020

Interface Technology

High-Voltage Transducer

Benefits of High Voltage Transducers versus Instrument Transformers
When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

Nov 2019

Interface Technology

DC, USA, Current

Shunt Resistor versus Hall Effect Technology
There are many systems where measurement of large DC currents are needed for performance and safety.

Mar 2018

Interface Technology

MTBF beyond 3000 years: A snap hook for your plant
Failure of equipment on the plant floor can lead to considerable and costly disruption.

Jan 2018

Interface Technology

UL

Knick Products Comply With UL - What Does That Mean?
There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

Nov 2017

Interface Technology

High-Voltage Transducer, P50000

High-voltage transducer offers more safety on railway vehicles
The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

Feb 2017

Interface Technology

P41000TRMS

True RMS Measurement with P41000TRMS
Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

Feb 2017

Interface Technology

P22400, SIL

Functional safety and maximum availability can go together
The requirements on operational and safety-related circuits are continuously growing.