Medición de tensión, corriente y temperatura para la fuente de alimentación de corriente continua

Para la medición fiable y precisa de la tensión y la corriente en instalaciones de corriente continua, desde hace décadas Knick suministra transductores con aislamiento galvánico. Durante este tiempo, la empresa se ha convertido en el líder mundial en este sector. Por este motivo, Knick también es el primer socio para proveedores y operadores de instalaciones de corriente continua cuando se trata de afrontar retos técnicos especiales, por ejemplo, opciones de supervisión del desgaste para el mantenimiento preventivo.

¿Por qué Knick?
Los dispositivos de protección en centrales transformadoras deben medir la corriente y la tensión con el fin de ejecutar algoritmos para la detección de cortocircuitos. Para ello, se requieren transformadores de medida de alta tensión que miden de forma rápida y precisa, y que al mismo tiempo soportan cargas elevadas. Además, deben soportar tensiones entre 750 y 3000 V CC, incluyendo sobretensiones transitorias, por ejemplo, durante la recuperación de energía en el frenado de los trenes. En estas aplicaciones de alta tensión, la protección de las personas y los dispositivos es fundamental. Por consiguiente, el gran aislamiento galvánico de los dispositivos de Knick es un factor importante a la hora de elegir los transformadores de medida.

Productos relacionados

P41000 Transductor de alta tensión/transductor | conmutables calibrados

Número de producto:

P41000

P41000AG Transductor de alta tensión/transductor | conmutables calibrados

Número de producto:

P41000AG

P42000 Transductor de alta tensión/transductor | conmutables calibrados

Número de producto:

P42000

P52000 VPD Transductor de alta tensión/transductor

Número de producto:

P52000VPD

P44000 Transductor de temperatura con alto aislamiento | Entrada de sensor Pt100

Número de producto:

P44000

P29000 Transductor de alta tensión/transductor | conmutables calibrados

Número de producto:

P29000

Industrias y aplicaciones relacionadas

Medición de alta tensión y corriente en vehículos ferroviarios

Knick ofrece transductores de alto aislamiento para mediciones de tensión y corriente. El P45000 es el transductor de alta tensión de mayor ahorro de espacio con SIL 2 para la medición de corriente continua a bordo de todos los trenes accionados por corriente continua y corriente alterna.

Industria ferroviaria

Mediciones eléctricas en subestaciones ferroviarias de corriente continua y en vehículos ferroviarios; conversión y reproducción de señales de velocidad en la industria ferroviaria

Folleto sobre la industria ferroviaria

Vista general de las aplicaciones y las soluciones de producto específicas del sector ferroviario

Descargar ahora

Artículo más reciente del blog

sept 2024

Interface Technology

Hydrogen

Stack and String Voltage Measurement in Electrolyzers and Fuel Cells

Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers

sept 2024

Interface Technology

Nuevas resistencias shunt de 30 mV para transductores de Knick

Knick amplía desde ya su oferta de accesorios para transductores de alta tensión con resistencias shunt con una caída de tensión de 30 mV

sept 2024

Interface Technology

Exhibition, InnoTrans

Innovations at InnoTrans 2024 for rolling stock and DC traction power supply

At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications

dic 2023

Company

|

Interface Technology

|

Process Analytics

Knick Austria - direct customer contact in Austria from 2024

Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

may 2022

Interface Technology

Energy

Energy storage - the handshake between renewable energy and electric vehicles

Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

feb 2022

Interface Technology

P52000VPD, Voltage

P52000VPD voltage presence detector reliably detects voltages up to 4200 V DC

The new P52000VPD voltage presence detector reliably monitors areas with high voltages and sends a signal to the downstream plant control system when a specified threshold value is reached.

sept 2021

Interface Technology

USA, Exhibition

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo

Knick will be showcasing high-voltage electrical measurement and signal conversion products.

may 2021

Interface Technology

Quadruple Standard Signals in Just One Signal Conditioner

The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

abr 2021

Interface Technology

Hydrogen

Electrical measurement and process analytics for hydrogen production

Knick products optimize hydrogen production in the process and in electrolyser operation.

mar 2021

Interface Technology

High-Voltage Transducer, USA, P44000

Condition Monitoring of High-Voltage Motors

Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

mar 2021

Interface Technology

Pulse frequency conditioner for speed sensors

The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

nov 2020

Interface Technology

High-Voltage Transducer, Voltage, P42000D2

Worldwide smallest transducer up to ±2200 V

The P40000 series from Knick enables reliable voltage measurements from ±50 mV to ±3600 V and current measurements from ±100 mA to ±20 kA.

ago 2020

Interface Technology

DC

Importance of broad-range power supplies for DC electrical measurement

Many DC electrical measurement products manufactured by Knick contain universal, also known as broad-range, power supplies.

jul 2020

Interface Technology

High-Voltage Transducer, DC, P29000

Measuring Photovoltaic Degradation

Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

jun 2020

Interface Technology

High-Voltage Transducer, USA

Electrical Measurement Solutions: Control from 480 to 4800 Volts

Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

jun 2020

Interface Technology

High-Voltage Transducer

Benefits of High Voltage Transducers versus Instrument Transformers

When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

nov 2019

Interface Technology

DC, USA, Current

Shunt Resistor versus Hall Effect Technology

There are many systems where measurement of large DC currents are needed for performance and safety.

mar 2018

Interface Technology

MTBF beyond 3000 years: A snap hook for your plant

Failure of equipment on the plant floor can lead to considerable and costly disruption.

ene 2018

Interface Technology

UL

Knick Products Comply With UL - What Does That Mean?

There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

nov 2017

Interface Technology

High-Voltage Transducer, P50000

High-voltage transducer offers more safety on railway vehicles

The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

feb 2017

Interface Technology

P41000TRMS

True RMS Measurement with P41000TRMS

Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

feb 2017

Interface Technology

P22400, SIL

Functional safety and maximum availability can go together

The requirements on operational and safety-related circuits are continuously growing.

No se encuentran productos.

Medición de tensión, corriente y temperatura para la fuente de alimentación de corriente continua

Keyfacts Processs/Application H2

Sector

Application

Measured Parameter

Key Requirements

Hier steht eine Headline H2 test

Headline H2

Headline H3

Productos relacionados

Industrias y aplicaciones relacionadas

Lorem Ipsum dolor sit amet

Folleto sobre la industria ferroviaria

Artículo más reciente del blog

Stack and String Voltage Measurement in Electrolyzers and Fuel Cells

Nuevas resistencias shunt de 30 mV para transductores de Knick

Innovations at InnoTrans 2024 for rolling stock and DC traction power supply

Knick Austria - direct customer contact in Austria from 2024

Energy storage - the handshake between renewable energy and electric vehicles

P52000VPD voltage presence detector reliably detects voltages up to 4200 V DC

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo

Quadruple Standard Signals in Just One Signal Conditioner

Electrical measurement and process analytics for hydrogen production

Condition Monitoring of High-Voltage Motors

Pulse frequency conditioner for speed sensors

Worldwide smallest transducer up to ±2200 V

Importance of broad-range power supplies for DC electrical measurement

Measuring Photovoltaic Degradation

Electrical Measurement Solutions: Control from 480 to 4800 Volts

Benefits of High Voltage Transducers versus Instrument Transformers

Shunt Resistor versus Hall Effect Technology

MTBF beyond 3000 years: A snap hook for your plant

Knick Products Comply With UL - What Does That Mean?

High-voltage transducer offers more safety on railway vehicles

True RMS Measurement with P41000TRMS

Functional safety and maximum availability can go together