Product added to compare
Product Compare added Product Compare

P41000AG High Voltage Transducer | Input up to ±120/1320 mV | Nominal current and overcurrent measurement

Description

P41000AG High Voltage Transducer | Input up to ±120/1320 mV | Nominal current and overcurrent measurement

The first Signal Conditioner with “Knick Curve” for Precise Measurement of DC Currents in Normal Operation and Measurement of Very High Currents in Overload Condition

  • The P41000 AG fulfills two tasks in a single product:
    • Continuous measurement of the regular supply current for timely detection of overcurrent events
    • Measurement, until disconnection, of the large overcurrents occurring in the event of a fault
  • This saves the need for an additional signal conditioner to measure overload currents and an additional measuring channel in a downstream protective device
  • With the P41000 AG, currents are always measured in combination with a (Maconic) shunt resistor. The P41000 AG measures shunt voltages of between 30 and 120 mV

P41000 AG (adaptive gain) is designed to measure currents in electrical supply systems and large power-consuming devices.

In addition to precise current measurements in normal operation, it also measures high overload currents occurring in the event of a fault, e.g., due to short circuits, defects, storm damage, etc.

The current curves over time measured with the P41000 AG are analyzed with protective devices so as to interrupt the power supply early on in the event of a fault.

In order to enable key conclusions about the condition of the system, it is important to know the level and duration of the overload currents up to the time the power supply was interrupted. The P41000 AG makes this possible

Nous attendons avec impatience votre réponse!
Nous Contacter

Détails techniques

Alimentation électrique: 24 V CA, 24 V CC, 110 / 115 V CA, 220 / 230 V CA, Bloc d'alimentation à plage élargie
Catégorie de produits: Amplificateur séparateur haute tension
Homologations: CSA, UL
Entrée: ≤ (±)500 mV
Sortie: 4 … 20 mA
Tension de service min.: 50 V, 300 V, 1000 V, 2000 V, 3600 V
Classe d'erreur: 0,1 %, < 0,5 %
Boîtier: Boîtier série 17,5 … 67,5 mm

Téléchargements

Brochures

[18000] Brochure
Precision Devices for the Rail Industry

Fiches techniques

KAT_FR_P41000-AG_221123-6995339

Certificats

[12071] Certificate of Compliance (UL)
No. 20170822-E356768 | 2017-08-22
MOTOR CONTROLLER ACCESSORIES OVER 1500 VOLTS
Series P4x000 / P442xx / P5xxxx

Notre service

Lorem lorem ipsum ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.

Utilisé dans les processus ou les applications

Amplificateurs séparateurs haute tension et convertisseurs de mesure pour l’acquisition et la conversion de signaux de courant, de tension, de température, de régime, de dilatation et de résistance.

Produits apparentés

Articles de blog pertinents

Company

Company Teasertext

Knick Austria - direct customer contact in Austria from 2024

Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

InnoTrans 2022 - three products as world firsts for rolling stock and DC traction power supply applications

At InnoTrans 2022 Knick presented 3 products as world firsts for rolling stock and DC traction power supply applications.

Energy storage - the handshake between renewable energy and electric vehicles

Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

Le détecteur de tension P52000VPD assure une détection fiable des tensions jusqu'à 4200 V DC

Le nouveau détecteur de tension P52000VPD (Voltage Presence Detection) assure une surveillance fiable des zones à haute tension et envoie un signal à la commande de l'installation en aval lorsqu'une valeur seuil définie est atteinte.

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo

Knick will be showcasing high-voltage electrical measurement and signal conversion products.