P44000 Temperature Transmitter | Input Pt100 resistance thermometer (RTD) | High isolation up to 6600V
Description
Precise Temperature Measurement at High Voltage Potentials up to 6.6 kV
- Transmitters for Pt100 temperature sensors, 2-, 3- or 4-wire connection
- Fixed range models for 0 to 150 °C, 0 to 200 °C and 0 to 300 °C input ranges
- Impressed output current of 4 to 20 mA
- Compact modular housings: 67.5 mm (D3) and 22.5 mm (D1)
- High isolation up to 6.6 kV AC/DC basic insulation and up to 2.5 kV AC/DC reinforced insulation with overvoltage category III and pollution degree 2 (input against output and power supply)
- 22.5 mm housing for less demanding isolation requirements up to 2 kV AC/DC (basic insulation)
- Measurement error of just ± 1 K (typically ± 0.5 K) and short T90 delay time of 100 ms
- Broad-range power supply for 22 ... 230 V AC/DC ensures safe operation even with unstable power grids
- Resistant to environmental influences through vacuum encapsulation
- Suitable for extreme environments: ambient temperature during operation –40 ... +85 °C
- 5-year warranty
When temperatures are to be measured using Pt100 resistance thermometers in high-voltage environments, standard temperature transmitters are often unsuitable due to their insufficient insulation.
Resistance thermometers can be insulated against high voltage. In practice, however, the available installation space is often too small. Moreover, the insulation is weakened by thermal and mechanical aging.
For temperature measurement on power electronics components, maximum safety is therefore provided by high-voltage resistant galvanic isolation. A typical application is the monitoring of the winding temperature of electric motors, generators or transformers.
The Solution:
Pt100 Transmitter with up to 6.6 kV AC/DC Basic Insulation
The new P44000 transmitters for high-voltage applications convert the resistance of a 2-, 3- or 4-wire Pt100 resistance thermometer into a 4 to 20 mA signal with high accuracy and short delay times.
The output signal is galvanically isolated from the input signal and the voltage supply. The isolation is designed for working voltages of up to 6.6 kV AC/DC. During routine testing, the test voltage is 15 kV AC. Vacuum encapsulation protects the circuit against environmental influences and ensures that the extraordinary isolation properties are maintained.
The product line covers the standard ranges of 0 to 150 °C, 0 to 200 °C and 0 to 300 °C. The transmitters are available in 67.5 and 22.5 mm modular housings to suit different requirements.
We look forward to hearing from you!
Contact Us
| Function: | Temperature measurement |
|---|---|
| Input: | 0 ... 100 °C, 0 ... 200 °C, 0 ... 300 °C |
| Output: | 4 ... 20 mA |
| Isolation AC/DC: | up to 2,000 V, up to 6,600 V |
| Test Voltage: | 7.5 kV AC , 15 kV AC |
| Power Supply: | 22 ... 230 V AC/DC |
| Cutoff Frequency: | Cutoff frequency 5 kHz, lower cutoff frequency on request |
| Ambient operating temperature: | –10 ... 70 °C |
| Dimensions (W x L x H): | 22.5 x 90 x 118 mm, 67.5 x 90 x 118 mm (D3) |
| Special features: | Low measurement error of typically 0.5 K, Short T90 delay time of 100 ms |
| Standards: | EN 61326, UL 347 |
| Product Category: | High Voltage Transducer, Sensor Transmitter |
Downloads
Certificates
Our service
Used in Process or Applications
Related Products
P41000TRMS
P42000TRMS
P43000TRMS
Relevant Blog Posts
Sept 2024
Interface Technology
Stack and String Voltage Measurement in Electrolyzers and Fuel Cells
Sept 2024
Interface Technology
New 30 mV Shunt Resistors for Knick Transducers
Sept 2024
Interface Technology
Innovations at InnoTrans 2024 for rolling stock and DC traction power supply
Dec 2023
Company
|Interface Technology
|Process Analytics
Knick Austria - direct customer contact in Austria from 2024
May 2022
Interface Technology
Energy storage - the handshake between renewable energy and electric vehicles
Feb 2022
Interface Technology
P52000VPD voltage presence detector reliably detects voltages up to 4200 V DC
Sept 2021
Interface Technology
Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo
May 2021
Interface Technology
Quadruple Standard Signals in Just One Signal Conditioner
Apr 2021
Interface Technology
Electrical measurement and process analytics for hydrogen production
Mar 2021
Interface Technology
Condition Monitoring of High-Voltage Motors
Mar 2021
Interface Technology
Pulse frequency conditioner for speed sensors
Nov 2020
Interface Technology
Worldwide smallest transducer up to ±2200 V
Aug 2020
Interface Technology
Importance of broad-range power supplies for DC electrical measurement
Jul 2020
Interface Technology
Measuring Photovoltaic Degradation
Jun 2020
Interface Technology
Electrical Measurement Solutions: Control from 480 to 4800 Volts
Jun 2020
Interface Technology
Benefits of High Voltage Transducers versus Instrument Transformers
Nov 2019
Interface Technology
Shunt Resistor versus Hall Effect Technology
Mar 2018
Interface Technology
MTBF beyond 3000 years: A snap hook for your plant
Jan 2018
Interface Technology
Knick Products Comply With UL - What Does That Mean?
Nov 2017
Interface Technology
High-voltage transducer offers more safety on railway vehicles
Feb 2017
Interface Technology
True RMS Measurement with P41000TRMS
Feb 2017
Interface Technology