SE740 Sensore di ossigeno ottico | M12 (8 pin) | 325 mm | Per aree con alti requisiti igienici
Codice prodotto:
SE740/3
Description
SE740 Sensore di ossigeno ottico | M12 (8 pin) | 325 mm | Per aree con alti requisiti igienici
Misurazione ottica dell'ossigeno con il metodo di smorzamento della fluorescenza
- Principio di misurazione indipendente dal fluido
- Nessun tempo di polarizzazione necessario
- Tappo del sensore sostituibile
- Monitoraggio dell'usura integrato
- Acciaio inox 1.4435 con certificato di ispezione 3.1, Ra < 0,4 μm
- Materiali conformi alla FDA
- Comunicazione digitale
Sensore ottico di ossigeno indipendente dal fluido con tempo di risposta rapido. Ideale per le misurazioni in aree igienicamente difficili. Sterilizzabile a vapore, autoclavabile e resistente a CIP.
Applicazioni
Industria alimentare, farmaceutica, fermentazione e processo
Non vediamo l'ora di ascoltarvi!
Contatto
| Campo di misura : | DO: 4 ppb ... 25 ppm, pO₂: 0,1 ... 600 mbar |
|---|---|
| Campo di temperatura: | -10 ... 140 °C (sterilizzazione a vapore), misurazioni di ossigeno 0 ... 85 °C |
| Collegamento di processo: | PG 13,5 |
| Connettore: | M12 (8 poli) |
| Drift at 25 °C and constant conditions: | < 1 % pro Woche |
| Lunghezza: | 325 mm |
| Parametro di misurazione: | Ossigeno |
| Parti del sensore a contatto con fluidi: | Acciaio inox 1.4435, silicone FDA, EPDM FDA |
| Pressure range Prel: | –1 ...12 bar |
| Rugosità superficiale albero in acciaio: | Ra < 0,4 μM (N5) |
| Sonda di temperatura: | sì, per la compensazione della temperatura |
| Measuring Principle: | Optisch |
| Max. CO₂ partial pressure: | 12 bar |
Scaricamento
Brochure
Schede tecniche
Servizio Unser
Utilizzato nei processi o nelle applicazioni
Prodotti correlati
SE706 Sensore di ossigeno | Memosens | 120 mm | Ex | Campo di misura (risoluzione) 0 … 50 mg/l (6 μg/l)
Codice prodotto:
SE706X/2-NMSN
SE706 Sensore di ossigeno | Memosens | 120 mm | Ex | Campo di misura (risoluzione) 0 … 50 mg/l (6 μg/l)
Codice prodotto:
SE706X/1-NMSN
SE706 Sensore di ossigeno | VP | 120 mm | Campo di misura (risoluzione) 0 … 50 mg/l (6 μg/l)
Codice prodotto:
SE706/1
SE706 Sensore di ossigeno | VP | 220 mm | Campo di misura (risoluzione) 0 … 50 mg/l (6 μg/l)
Codice prodotto:
SE706/2
SE707 Sensore di ossigeno | Memosens | 120 mm | Ex | Campo di misura (risoluzione) 0 … 50 mg/l (1 μg/l)
Codice prodotto:
SE707X/1-NMSN
SE707 Sensore di ossigeno | Memosens | 220 mm | Ex | Campo di misura (risoluzione) 0 … 50 mg/l (1 μg/l)
Codice prodotto:
SE707X/2-NMSN
SE707 Sensore di ossigeno | Memosens | 320 mm | Ex | Campo di misura (risoluzione) 0 … 50 mg/l (1 μg/l)
Codice prodotto:
SE707X/3-NMSN
SE707 Sensore di ossigeno | VP | 120 mm | Campo di misura (risoluzione) 0 … 50 mg/l (1 μg/l)
Codice prodotto:
SE707/1
SE715 Sensore di ossigeno | Memosens | 120 mm | Per il trattamento delle acque e delle acque reflue
Codice prodotto:
SE715/1-MS
SE740 Sensore di ossigeno ottico | M12 (8 pin) | 120 mm | Per aree con alti requisiti igienici
Codice prodotto:
SE740/1
SE740 Sensore di ossigeno ottico | M12 (8 pin) | 215 mm | Per aree con alti requisiti igienici
Codice prodotto:
SE740/2
SE740 Sensore di ossigeno ottico | M12 (8 pin) | 325 mm | Per aree con alti requisiti igienici
Codice prodotto:
SE740/3
SE740 Sensore di ossigeno ottico | M12 (8 pin) | 425 mm | Per aree con alti requisiti igienici
Codice prodotto:
SE740/4
Post rilevanti del blog
set 2024
Interface Technology
Stack and String Voltage Measurement in Electrolyzers and Fuel Cells
Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers
set 2024
Interface Technology
Nuove resistenze di shunt da 30 mV per trasmettitori Knick
Knick amplia da subito la gamma di accessori per i suoi trasmettitori ad alta tensione con resistenze di shunt con una caduta di tensione di 30 mV
set 2024
Interface Technology
Innovations at InnoTrans 2024 for rolling stock and DC traction power supply
At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications
dic 2023
Company
|Interface Technology
|Process Analytics
Knick Austria - direct customer contact in Austria from 2024
Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology
mag 2022
Interface Technology
Energy storage - the handshake between renewable energy and electric vehicles
Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.
feb 2022
Interface Technology
P52000VPD voltage presence detector reliably detects voltages up to 4200 V DC
The new P52000VPD voltage presence detector reliably monitors areas with high voltages and sends a signal to the downstream plant control system when a specified threshold value is reached.
set 2021
Interface Technology
Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo
Knick will be showcasing high-voltage electrical measurement and signal conversion products.
mag 2021
Interface Technology
Quadruple Standard Signals in Just One Signal Conditioner
The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.
apr 2021
Interface Technology
Electrical measurement and process analytics for hydrogen production
Knick products optimize hydrogen production in the process and in electrolyser operation.
mar 2021
Interface Technology
Condition Monitoring of High-Voltage Motors
Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.
mar 2021
Interface Technology
Pulse frequency conditioner for speed sensors
The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.
nov 2020
Interface Technology
Worldwide smallest transducer up to ±2200 V
The P40000 series from Knick enables reliable voltage measurements from ±50 mV to ±3600 V and current measurements from ±100 mA to ±20 kA.
ago 2020
Interface Technology
Importance of broad-range power supplies for DC electrical measurement
Many DC electrical measurement products manufactured by Knick contain universal, also known as broad-range, power supplies.
lug 2020
Interface Technology
Measuring Photovoltaic Degradation
Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.
giu 2020
Interface Technology
Electrical Measurement Solutions: Control from 480 to 4800 Volts
Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.
giu 2020
Interface Technology
Benefits of High Voltage Transducers versus Instrument Transformers
When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.
nov 2019
Interface Technology
Shunt Resistor versus Hall Effect Technology
There are many systems where measurement of large DC currents are needed for performance and safety.
mar 2018
Interface Technology
MTBF beyond 3000 years: A snap hook for your plant
Failure of equipment on the plant floor can lead to considerable and costly disruption.
gen 2018
Interface Technology
Knick Products Comply With UL - What Does That Mean?
There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.
nov 2017
Interface Technology
High-voltage transducer offers more safety on railway vehicles
The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.
feb 2017
Interface Technology
True RMS Measurement with P41000TRMS
Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.
feb 2017
Interface Technology
Functional safety and maximum availability can go together
The requirements on operational and safety-related circuits are continuously growing.