Product added to compare
Product Compare added Product Compare

41 Isolated Standard Signal Conditioner | Input 0(4) … 20 mA or 0 … 50 mA | Loop-Powered

Description

41 Isolated Standard Signal Conditioner | Input 0(4) … 20 mA or 0 … 50 mA | Loop-Powered

For isolation of 0(4) ... 20 mA standard signals, up to 3 channels

  • No power supply 
    No mains influences
  • Extremely high accuracy
  • Broad range of applications 
    Current transmission from 2 µA to 50 mA
  • Maximum reliability 
    No unnecessary heating and therefore maximum service life of components
  • Marginal loading of measured signal
    Voltage drop of only 1.2 V
  • Low signal delay
  • Space-saving thanks to multi-channel versions
    Modular housing with up to three channels
  • Quality ensured by computer-controlled testing
  • 5-year warranty 

The 41 A2 with transformer-based isolation offer properties which no other loop-powered DC isolator can even come close to.
Suitable for galvanic isolation of 0/4 to 20 mA signals. Thanks to the 0.2 % fault class and an internal voltage requirement of just 1.2 V, this isolator can be used for a broad range of applications. The A2 modular housing with a width of 22.5 mm for max. 3 isolators offers optimum space usage in multichannel mode. The full encapsulation guarantees maximum reliability even in extreme conditions.

여러분의 의견을 기다리겠습니다!
문의하기

기술 세부 정보

기기 타입: 보조 전원이 없는 표준 신호 아이솔레이터
전원 공급장치: 루프 전원
제품 카테고리: 범용 아이솔레이터 / 표준 신호 아이솔레이터
입력: (±)20 mA, 4 … 20 mA
출력: 0 … 20 mA, 0 … 50 mA, 4 … 20 mA
최소 작동 전압: 50 V, 300 V
오류 등급: 0.02 %, 0.1 %, < 0.5 %
구조: 17.5 ... 67.5 mm 모듈식 외함

다운로드

데이터 시트

[824] 데이터 시트
IsoTrans 41
제품 설명 | 명세서 | 제품 범위

서비스

Lorem lorem ipsum ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.

프로세스 또는 애플리케이션에서 사용

전류, 전압, 온도, 회전 속도, 변형 및 저항 신호의 측정과 변환을 위한 고전압 절연 증폭기 및 트랜스미터.

관련 제품

Relevante Blogbeiträge

Knick Austria - direct customer contact in Austria from 2024

Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

InnoTrans 2022 - three products as world firsts for rolling stock and DC traction power supply applications

At InnoTrans 2022 Knick presented 3 products as world firsts for rolling stock and DC traction power supply applications.

Energy storage - the handshake between renewable energy and electric vehicles

Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

전압 검출기 P52000VPD는 최대 4200 V DC까지 전압을 안정적으로 감지합니다.

새로운 전압 감지기 P52000VPD(전압 존재 감지)는 고전압 영역을 안정적으로 모니터링하고 전압이 지정된 임계값에 도달하면 신호를 다운스트림 시스템 제어 장치로 전송합니다.

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo

Knick will be showcasing high-voltage electrical measurement and signal conversion products.

VariTrans A20340 - 단 하나의 절연 증폭기에서 표준 신호 4배율

The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

Electrical measurement and process analytics for hydrogen production

Knick products optimize hydrogen production in the process and in electrolyser operation.

Condition Monitoring of High-Voltage Motors

Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

Pulse frequency conditioner for speed sensors

The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

±2200 V까지 사용할 수 있는 세계에서 가장 작은 절연 증폭기

저희 Knick의 VariTrans P 40000 시리즈를 통해 ± 50 mV에서 ± 3600 V까지의 전압과 ± 100 mA에서 ± 20 kA까지의 전류의 안정적인 측정이 가능합니다. 이미 입증된 ProLine 제품군에 DIN 레일 설치를 할 수 있도록 작은 외함을 가진 절연 증폭기 P42000D2가 추가됐습니다.

Importance of broad-range power supplies for DC electrical measurement

Many DC electrical measurement products manufactured by Knick contain universal, also known as broad-range, power supplies.

Measuring Photovoltaic Degradation

Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

Electrical Measurement Solutions: Control from 480 to 4800 Volts

Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

Benefits of High Voltage Transducers versus Instrument Transformers

When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

Shunt Resistor versus Hall Effect Technology

There are many systems where measurement of large DC currents are needed for performance and safety.

MTBF beyond 3000 years: A snap hook for your plant

Failure of equipment on the plant floor can lead to considerable and costly disruption.

Knick Products Comply With UL - What Does That Mean?

There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

High-voltage transducer offers more safety on railway vehicles

The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

True RMS Measurement with P41000TRMS

Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

Functional safety and maximum availability can go together

The requirements on operational and safety-related circuits are continuously growing.