홈페이지로 이동
모든 범주 표시 제품 뒤로

A20400 Isolated Standard Signal Conditioner | Input 0(4) … 20 mA | Isolation up to 600 V | Load stop function

제품 번호: A20400
설명 기술 세부 정보 다운로드 프로세스 또는 애플리케이션에서 사용 관련 블로그 게시물

Description

A20400 Isolated Standard Signal Conditioner | Input 0(4) … 20 mA | Isolation up to 600 V | Load stop function

The first decoupled passive isolator with load stop function to provide protective separation of 0(4) ... 20 mA standard signals.

  • Extremely compact design
    up to 320 channels per meter
  • 1- and 2-channel versions
    cheap and flexible for a wide range of applications
  • Galvanic isolation
    between the input and output protection against incorrect measurements or damage to the equipment due to parasitic voltages
  • Protective separation up to 300 V AC/DC according to EN 61140
    to protect personnel and equipment
  • Load stop function prevents feedback
    e.g. in the case of an open output circuit
  • No power supply required
    Cost saving due to lower wiring effort no mains interference, no unnecessary self-heating and therefore maximum component service life
  • High accuracy
    No distortion of the measurement signal
  • Maximum reliability
    No repair and failure costs
  • International use
    UL / CSA approvals
  • 5-year warranty

Thanks to an extremely high packing density of up to 320 channels per meter of mounting rail and outstanding technical properties such as protective separation, these isolators leave the competition in the dust – even when it comes to the price-performance ratio!

The A20400 draws its power as a voltage drop directly from the measurement signal without falsifying it. There are no costs for a power supply and wiring. The A20400 has virtually no self-heating that would cause the electronic components to age faster. Together with a patented circuit design, this means maximum reliability. The consequence of this extraordinary long service life: 5-year warranty!

여러분의 의견을 기다리겠습니다!
문의하기

기술 세부 정보

전위 차단 AC/DC: 최대 600 V
기능: 전송 / 표준 신호 절연
입력: 0 ... 20 mA, 4 ... 20 mA
출력: 0 ... 20 mA, 1:1 전송, 4 ... 20 mA
최소 시험 전압: 2.5 kV AC
전원 공급장치: 보조 전원 없음
차단 주파수: 약 100 Hz
작동 환경 온도: –20 … 65 °C
치수(W x L x H): 6.2 x 93 x 101 mm
특장점: DIN 레일 1미터당 320개의 채널의 매우 높은 패킹 밀도, 높은 신뢰도: MTBF(평균 무고장 기간) 1,031년, 뛰어난 가성비, 부하 정지 기능이 있는 최초의 분리형 수동 아이솔레이터(옵션)
제품 카테고리: 범용 아이솔레이터 / 표준 신호 아이솔레이터

다운로드

사용 설명서 (매뉴얼)

[861] User Manual (DE, EN)
A204**
Version 05

데이터 시트

[854] 데이터 시트
A20400
제품 설명 | 명세서 | 제품 범위

인증서

[12611] DNV•GL Type Approval Certificate
No. TAA00000AX | 2021-04-06
Revision No: 2
A204**P0
[11555] Certificate of Compliance (UL)
No. 20181015-E220033; 2018-10-15 (ZT181016K)
POWER CIRCUIT AND MOTOR-MOUNTED APPARATUS
A204** and BL541

Software

[12154] Software (.zip)
ePLAN P8 Produktmakros
[11876] Knick Produktmakros (.pdf)
ePLAN Electric P8

서비스

프로세스 또는 애플리케이션에서 사용

인터페이스 기술
전류, 전압, 온도, 회전 속도, 변형 및 저항 신호의 측정과 변환을 위한 고전압 절연 증폭기 및 트랜스미터.
제품
까다로운 분야에서의 사용을 위한 장기적으로 안정적인 고전압 절연 증폭기, 트랜스미터 및 신호 배율기

관련 제품

A21000 Isolated Standard Signal Conditioner | Input and Output 0(4) … 20 mA or 0 … 10 V | Isolation up to 300 V
A21000 Isolated Standard Signal Conditioner | Input and Output 0(4) … 20 mA or 0 … 10 V | Isolation up to 300 V
제품 번호:

A21000

관련 블로그 게시물

9월 2024

Interface Technology

Hydrogen

Stack and String Voltage Measurement in Electrolyzers and Fuel Cells
Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers

9월 2024

Interface Technology

크닉 트랜스미터를 위한 새로운 30mV 분로 저항기
크닉은 이제 전압 강하가 30mV인 분로 저항기를 포함하도록 고전압 트랜스미터용 액세서리 제품군을 확장함
Innovations at InnoTrans 2024

9월 2024

Interface Technology

Exhibition, InnoTrans

Innovations at InnoTrans 2024 for rolling stock and DC traction power supply
At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications

12월 2023

Company

|

Interface Technology

|

Process Analytics

Knick Austria - direct customer contact in Austria from 2024
Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

5월 2022

Interface Technology

Energy

Energy storage - the handshake between renewable energy and electric vehicles
Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

2월 2022

Interface Technology

P52000VPD, Voltage

전압 검출기 P52000VPD는 최대 4200 V DC까지 전압을 안정적으로 감지합니다.
새로운 전압 감지기 P52000VPD(전압 존재 감지)는 고전압 영역을 안정적으로 모니터링하고 전압이 지정된 임계값에 도달하면 신호를 다운스트림 시스템 제어 장치로 전송합니다.

9월 2021

Interface Technology

USA, Exhibition

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo
Knick will be showcasing high-voltage electrical measurement and signal conversion products.

5월 2021

Interface Technology

VariTrans A20340 - 단 하나의 절연 증폭기에서 표준 신호 4배율
The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

4월 2021

Interface Technology

Hydrogen

Electrical measurement and process analytics for hydrogen production
Knick products optimize hydrogen production in the process and in electrolyser operation.

3월 2021

Interface Technology

High-Voltage Transducer, USA, P44000

Condition Monitoring of High-Voltage Motors
Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

3월 2021

Interface Technology

Pulse frequency conditioner for speed sensors
The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

11월 2020

Interface Technology

High-Voltage Transducer, Voltage, P42000D2

±2200 V까지 사용할 수 있는 세계에서 가장 작은 절연 증폭기
저희 Knick의 VariTrans P 40000 시리즈를 통해 ± 50 mV에서 ± 3600 V까지의 전압과 ± 100 mA에서 ± 20 kA까지의 전류의 안정적인 측정이 가능합니다. 이미 입증된 ProLine 제품군에 DIN 레일 설치를 할 수 있도록 작은 외함을 가진 절연 증폭기 P42000D2가 추가됐습니다.

8월 2020

Interface Technology

DC

Importance of broad-range power supplies for DC electrical measurement
Many DC electrical measurement products manufactured by Knick contain universal, also known as broad-range, power supplies.

7월 2020

Interface Technology

High-Voltage Transducer, DC, P29000

Measuring Photovoltaic Degradation
Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

6월 2020

Interface Technology

High-Voltage Transducer, USA

Electrical Measurement Solutions: Control from 480 to 4800 Volts
Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

6월 2020

Interface Technology

High-Voltage Transducer

Benefits of High Voltage Transducers versus Instrument Transformers
When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

11월 2019

Interface Technology

DC, USA, Current

Shunt Resistor versus Hall Effect Technology
There are many systems where measurement of large DC currents are needed for performance and safety.

3월 2018

Interface Technology

MTBF beyond 3000 years: A snap hook for your plant
Failure of equipment on the plant floor can lead to considerable and costly disruption.

1월 2018

Interface Technology

UL

Knick Products Comply With UL - What Does That Mean?
There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

11월 2017

Interface Technology

High-Voltage Transducer, P50000

High-voltage transducer offers more safety on railway vehicles
The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

2월 2017

Interface Technology

P41000TRMS

True RMS Measurement with P41000TRMS
Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

2월 2017

Interface Technology

P22400, SIL

Functional safety and maximum availability can go together
The requirements on operational and safety-related circuits are continuously growing.