P32200 Sensor Transmitter | Input strain gauges and load cells | For safety circuits up to SIL3 | Configuration interface for PC

제품 번호: P32200

The universal P32200 strain gauge transmitters provide connection possibilities for all standard strain gauge force transducers and strain gauge load cells in full bridge configuration. They can be flexibly adapted to the respective measuring task using DIP and rotary encoder switches or via an IrDA port.

Universal usability
for strain gauges, pressure and load cells, and other resistive measuring bridges
Convenient setting of all parameters
via IrDA interface. Uncomplicated, menu-guided adjustment also “on site“ including archiving of the configuration data.
Intuitive configuration
of the basic parameters. Easy, without tools, using 4 rotary and 8 DIP switches
Calibrated range selection
No complicated trimming
Convenient adjustment
Zero point and sensitivity adjustable via IrDA port
Simulation
of any desired output values for correct installation/commissioning
Protective separation
according to EN 61140 - protection of the maintenance staff and subsequent devices against excessively high voltages up to 300 V AC/DC
Functional safety
up to SIL 2 (up to SIL 3 in case of redundant configuration) with TÜV certificate Systematically developed according to EN 61508
High accuracy
due to innovative circuit design
Minimum space consumption
in the enclosure. Modular housing: just 6 mm wide. More transmitters per meter of DIN rail
Low-cost assembly
Quick mounting, convenient connection of power supply through DIN rail bus connectors (in case of 24 V DC power supply)
5-year warranty

3-port isolation with protective separation up to 300 V AC/DC according to EN 61140 ensures optimal protection of personnel and equipment as well as unaltered transmission of the measurement signals. The P32200 offer maximum performance in the smallest of spaces.

Adjusting the zero point and sensitivity to the individual strain gauge sensor is particularly convenient via the infrared port, for example using a PDA. Sensors with known characteristics can be very easily calibrated using 4 rotary encoder switches and 8 DIP switches. Special measuring tasks can be solved with SensoTrans devices that Knick configures according to individual specifications. Fixed-range devices without switches are used, for example, when manipulations or mix-ups must be precluded.

Knick offers the P32200 transmitter with SIL approval for applications with high demands on functional safety. The requirements of EN 61508 were implemented through specially developed hardware and software. The implemented fail-safe concept makes use of structural measures at the device level (redundancy of system components) and diagnostic methods for selective fault detection. The product is SIL 2 approved (EN 61508) by an authorized body (TÜV Rheinland). SIL 3 in redundant implementations

여러분의 의견을 기다리겠습니다!
문의하기

기술 세부 정보

전위 차단 AC/DC:	최대 300 V
입력:	로드셀, 변형계
출력:	0 ... (±)5 V, 0 ... 10 V, 0 ... 20 mA, 4 ... 20 mA
최소 시험 전압:	2.5 kV AC
전원 공급장치:	24 V DC
작동 환경 온도:	0 … 55 (65) °C
치수(W x L x H):	6.2 x 93 x 101 mm
특장점:	6 mm 외함 내 로드셀 및 변형계용 트랜스미터, PC를 통한 환경 설정용 인터페이스, 간단하고 직관적인 환경 설정을 위한 로터리 스위치 및 DIP 스위치, 최대 SIL 3의 안전 회로용
제품 카테고리:	측정 변환기