topdata-compare-products.firstProductAddedHint
Product Compare added Product Compare

MemoRail A1401 Compact Multiparameter Transmitter | Memosens Sensors | 2x 4…20 mA Active Output | 24 V DC Power Supply

Description

MemoRail A1401 Compact Multiparameter Transmitter | Memosens Sensors | 2x 4…20 mA Active Output | 24 V DC Power Supply

MemoRail A 1401 is the first genuinely compact, digital analyzer for measuring pH/ORP, conductivity, oxygen and temperature with Memosens and digital sensors. 

Two analog active 4 ... 20 mA outputs supply the measured values for the process variable and temperature to the process control system or a PLC.

Plug & Measure 
Pre-calibrated Memosens sensors reduce operating costs and maximize the availability of the measuring point.

Memosens 
Optimum availability of the measuring point is achieved by using pre-calibrated sensors with contactless Memosens technology. Calibration is no longer carried out on site but under reproducible conditions in the lab using the new MemoSuite software tool. Individual sensor data are always directly assigned to each Memosens sensor. Problems at the connector involving humidity, corrosion or even defective galvanic isolation are a thing of the past.

Compact 
The highly space-saving modular housing of the MemoRail devices is only 12.5 mm wide.

Cost-Efficient
The outstanding properties of MemoRail enable the implementation of measuring stations with low overall costs, especially in combination with modern Memosens sensors specially tailored for use with MemoRail.

Universal Use
MemoRail A1401 is an attractively priced solution in process analytics and optimally suited for use in numerous industry segments, such as chemicals, pharmaceuticals, biotechnology, food and beverage, or energy.
With its narrow modular housing, MemoRail A1401 is perfectly suited to installation in restricted spaces – e.g, in control cabinets, fermenters or in process plants.

  • 2 current outputs: 4 to 20 mA (active)
  • 24 V DC power supply (via plug-in terminals or DIN rail bus connector)
  • Space-saving modular housing, 12.5 mm wide
  • Multiparameters: measurement of pH/ORP, conductivity, oxygen and temperature
  • Memosens communication
  • Simple configuration via DIP switches

 

MemoSuite – The Software Tool

Fast and User-Friendly 
The MemoSuite software allows calibrating Memosens sensors under reproducible conditions in the lab. MemoLink connects the sensors to the PC. On-site calibration under adverse ambient conditions is no longer necessary. The only thing required there is the quick and uncomplicated replacement of the used sensors with pre-calibrated sensors.

Two Versions 
MemoSuite Basic and MemoSuite Advanced meet different application-specific requirements:

MemoSuite Basic 
calibrates Memosens sensors.

MemoSuite Advanced 
not only performs a calibration, but also provides diagnostics and database documentation of the sensors. The database meets the requirements of GMP and FDA CFR 21 Part 11.

여러분의 의견을 기다리겠습니다!
문의하기

기술 세부 정보

2선식 또는 4선식: 4-선식
permanently installed / portable: permanently installed
센서 연결: Memosens
외함: PA 66
전류 출력: 2 x 4...20mA, 활성
제품 라인: MemoRail
채널: 1 채널
측정 파라미터 : pH/ORP, 다중 매개변수, 용존 산소, 전도도
통신(출력, 디지털): 아날로그 4-20mA
폭발 방지: 전직 없음
구조: 12.5 mm 모듈식 외함

다운로드

브로셔

[13209] 브로셔
Memosens@Knick

데이터 시트

[14392] Data sheet
MemoRail A1401
Product Description | Specifications | Product Range
[14392] 데이터 시트
MemoRail A1401
제품 설명 | 명세서 | 제품 범위

서비스

Lorem lorem ipsum ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.

프로세스 또는 애플리케이션에서 사용

보일러 급수, 증기 및 응축수에서의 측정
In pharmaceutical, biological or process systems for food production, all process-wetted system components must be cleaned and sterilized at regular intervals…

관련 제품

관련 블로그 게시물

Uniclean 700 Series - Modular control system for automated sensor cleaning

With the Uniclean 700 series, Knick is introducing a modular control system, that can be installed very quickly and cost-effectively as a flexible entry-level solution for automated sensor cleaning.

Knick Austria - direct customer contact in Austria from 2024

Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

Robust WA111 Retractable Fitting Made of Plastic for Highly Corrosive Operating Conditions

The plastic WA111 retractable fitting is a robust and cost-effective solution for corrosive processes and environments. It is equipped with a secure lock function and multiple nozzles for thorough sensor cleaning.

Successful joint project : Knick developed the special Ceramat WA 155 retractable fitting for optical probes from SOPAT

In cooperation with SOPAT, Knick developed a special Ceramat fitting for optical probes for automatic cleaning in fouling processes.

pH and conductivity measurement in vaccine production

Pharmaceutical contract manufacturer relies on Knick's transmitters for modular production plants for Covid-19 vaccines.