Skip to main content

在重工业和加工业监测大直流电流

很多工业领域的基本生产和加工过程都需要使用大直流电流。例如,用于金属提取或化学品生产的电解工艺、金属镀层工艺或电弧焊技术。除此之外,直流电机易于控制,并且在所有转速范围内都具有恒定的转矩,因此,在许多工业应用中都是首选。

直流工业 - 供电领域的模式转换

从中期来看,增加对工业设备的直流供电也将发挥重要作用。与现有的交流供电相比,直流电网可大幅简化系统并提高效率,因此 Open DC Alliance (ODCA) 致力于大范围推行直流供电。 ODCA 的创始成员包括 Knick,该组织发布了在工业设备中采用直流电网的完整系统概念。发展仍处于起步阶段,但由于无可争议的巨大经济优势,未来具有相当大的潜力。作为工业直流应用的领先测量技术专家,我们密切关注这一发展。我们拥有广泛的专业知识和制造深度,能够针对该领域的严苛测量技术挑战开发理想的解决方案。

为何选择 Knick?
如果要在恶劣条件下安全测量高直流电压和大电流,Knick 高隔离性变送器无疑是不二之选。高压变送器的增益误差小于测量值的 0.3%,能采集高达 4500 V DC 的电压或者高达 20000 A 的电流(通过分流电阻),并作为 4...20 mA 标准信号输出。由于分流变送器标配 3 端口隔离并且有稳定的共模特性,因此传输距离长、测量点与控制中心之间的高电位差以及强烈的 EMC 影响都不是信号传输的干扰源。

H2 [Ind] Application Description

Absatz [Ind] briefly: where can be used Knick products

Related Applications

您有疑问吗?我们竭诚为您服务。
联系我们

合适的产品

接口技术领域的最新博客文章

Stack and String Voltage Measurement in Electrolyzers and Fuel Cells

Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers

适用于 Knick 变送器的新型 30 mV 分流电阻

Knick 从现在起为其高压变送器的附件产品系列增添具有 30 mV 电压降的分流电阻
Innovations at InnoTrans 2024

Innovations at InnoTrans 2024 for rolling stock and DC traction power supply

At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications

Knick Austria - direct customer contact in Austria from 2024

Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

Energy storage - the handshake between renewable energy and electric vehicles

Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

P52000VPD 电压检测器能够可靠检测高达 4200 V 的直流电压

新型电压检测器 P52000VPD (Voltage Presence Detection) 能够可靠监控高压应用领域,在达到指定阈值时向下游设备控制器发送信号。

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo

Knick will be showcasing high-voltage electrical measurement and signal conversion products.

VariTrans A20340 – 仅需一个隔离放大器的标准信号倍增

The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

Electrical measurement and process analytics for hydrogen production

Knick products optimize hydrogen production in the process and in electrolyser operation.

Condition Monitoring of High-Voltage Motors

Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

Pulse frequency conditioner for speed sensors

The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

全球最小传感器,高达±2200 V

Knick的VariTrans P 40000系列能对从±50 mV到±3600 V的电压,以及从±100 mA到±20 kA的电流进行可靠测量。经过验证的ProLine系列现在已经扩展到包含传感器P42000D2,它安装在Din导轨上,模块设计紧凑,测量高达2200 V的直流电压。

宽范围电源对于直流电气测量的重要性

Knick生产的众多直流电气测量产品都包含通用的,也称为宽范围电源。这意味着它们将工作在一个相对较宽的电压范围窗口内,如20…253V,交流或直流。

Measuring Photovoltaic Degradation

Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

Electrical Measurement Solutions: Control from 480 to 4800 Volts

Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

Benefits of High Voltage Transducers versus Instrument Transformers

When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

分流器和霍尔效应的技术对比

在许多系统中,为了确保性能和安全,需要测量较大的直流电流。两个例子是静态励磁和轨道牵引动力。这些电流的测量通常采用两种主要原理之一:配有mV级变送器的分流器电阻或霍尔效应传感器来反馈。

MTBF beyond 3000 years: A snap hook for your plant

Failure of equipment on the plant floor can lead to considerable and costly disruption.

Knick Products Comply With UL - What Does That Mean?

There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

High-voltage transducer offers more safety on railway vehicles

The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

True RMS Measurement with P41000TRMS

Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

Functional safety and maximum availability can go together

The requirements on operational and safety-related circuits are continuously growing.