Skip to main content

37 Isolated Standard Signal Conditioner | Input 0(4) … 20 mA | Ex | Transmission of HART signals | Loop-Powered

Description

37 Isolated Standard Signal Conditioner | Input 0(4) … 20 mA | Ex | Transmission of HART signals | Loop-Powered

For safe-area/hazardous-area isolation of 0 ... 20 mA standard signals without power supply

  • Galvanic isolation between input and output signal
    Protection against measuring errors caused by grounding problems and parasitic interference voltages
  • No power supply required
    Cost savings due to lower wiring effort, no mains interference
  • Very low residual ripple
    No interference of the connected measuring or control system
  • Explosion protection according to ATEX
  • High transmission accuracy
    Excellent pulse formation due to exact transmission of the measured values
  • Very low common-mode interference
    Prevention of incorrect measurements or failures caused by interference
  • Maximum reliability
    No repair or failure costs
  • 10 kV test voltage
    (optional)
  • Protective separation according to EN 61140
    Protection of the maintenance staff and subsequent devices against excessively high voltages
  • SMART transmission
    Bi-directional point-to-point transmission of digital data according to the HART specification
  • 5-year warranty

Knick loop-powered isolators for 0 ... 20 mA signal transmission. These modules are available as hazardous-area input and hazardous-area output isolators. Due to their patented design (German patent 3526997), they are considered to be the most reliable solution for isolating standard signals without an external power supply.

The 37A7 isolators are not only suitable as highly reliable isolators for normal applications, they also meet the most stringent requirements that can be set for potential isolation. There is no need for power supply wiring.

我们期待您的来信
联系我们

技术细节

是否防爆: Ex
通信(输出,数字): HART
产品类别: 通用隔离器 / 标准信号隔离器

下载

操作说明书

[14276] User Manual (DE, EN)
37 Isolated Standard Signal Conditioner
Version 02

小册子

[14160] 手册
产品总览 接口技术

证书

[13687] EU Declaration of Conformity (DE, EN, FR)
WG 25 A7, Opt. ... & IsoTrans 37 A7, Opt. ...
No. EU210416A | 2021-04-16

Software

[12154] Software (.zip)
ePLAN P8 Produktmakros
[11876] Knick Produktmakros (.pdf)
ePLAN Electric P8

我们的服务

在工艺或应用中使用

高压隔离放大器和变送器,用于采集和转换电流、电压、温度、转速、应变和电阻信号。

相关产品

相关的博客文章

ProgaLog 4000 电脑端参数设置工具

仅利用一款参数设置工具 ProgaLog 4000,即可对 Stratos Multi 与 Protos II 4400 全系列模块化配置式变送器进行便捷的离线参数设置、设置保存、复制用于其他变送器以及记录备审。

采用 Profinet 技术的新型 Stratos Multi E461N 变送器

新型 Stratos Multi E461N 多参数变送器的 Profinet 接口可实现从现场层直至常见过程控制系统的全程过程变量的通信与预测性维护。

Stratos Multi E401X - 用于易爆区域的多参数变送器

Knick 成熟的分析测量仪器家族中,现又全新增添了 Stratos Multi,可用于易爆区域。

使用配备 EtherNet/IP 协议的 Stratos Multi E471 进行过程优化

EtherNet/IP communication protocol allows the transmitter to be easily integrated into Industrial Ethernet networks as PCS.

New multiparameter transmitter Stratos Multi

Knick is launching the the next generation in its Stratos analyzer product line.