Name: P41000AG High Voltage Transducer | Input up to ±120/1320 mV | Nominal current and overcurrent measurement
SKU: P41000AG
Price: 119.0 EUR
Availability: InStock

P41000AG High Voltage Transducer | Input up to ±120/1320 mV | Nominal current and overcurrent measurement

The first Signal Conditioner with “Knick Curve” for Precise Measurement of DC Currents in Normal Operation and Measurement of Very High Currents in Overload Condition

The P41000 AG fulfills two tasks in a single product:
- Continuous measurement of the regular supply current for timely detection of overcurrent events
- Measurement, until disconnection, of the large overcurrents occurring in the event of a fault
This saves the need for an additional signal conditioner to measure overload currents and an additional measuring channel in a downstream protective device
With the P41000 AG, currents are always measured in combination with a (Maconic) shunt resistor. The P41000 AG measures shunt voltages of between 30 and 120 mV

P41000 AG (adaptive gain) is designed to measure currents in electrical supply systems and large power-consuming devices.

In addition to precise current measurements in normal operation, it also measures high overload currents occurring in the event of a fault, e.g., due to short circuits, defects, storm damage, etc.

The current curves over time measured with the P41000 AG are analyzed with protective devices so as to interrupt the power supply early on in the event of a fault.

In order to enable key conclusions about the condition of the system, it is important to know the level and duration of the overload currents up to the time the power supply was interrupted. The P41000 AG makes this possible

我们期待您的来信
联系我们

技术细节

产品类别:	高压隔离放大器
最小工作电压:	50 V, 300 V, 1000 V, 2000 V, 3600 V
电源:	24 V AC, 24 V DC, 110 / 115 V AC, 220 / 230 V AC, 宽范围电源
防爆认证类别:	CSA, UL
输入:	≤ (±)500 mV
输出:	4 … 20 mA
误差级别:	0.1 %, < 0.5 %
结构型式:	17.5 … 67.5 mm 模块化外壳