Skip to main content

WA150 Ceramat 伸缩式连接件 | 陶瓷密封 | 气动 | 碳纤维增强 PVDF 或 PEEK

Description

WA150 Ceramat 伸缩式连接件 | 陶瓷密封 | 气动 | 碳纤维增强 PVDF 或 PEEK

直插式连接件,具有特定应用的过程连接

  • 使用陶瓷密封件与过程隔离:
    • 极高的硬度(莫氏硬度 9),可防止密封面在磨蚀性介质中磨损。
    • 几乎无磨损
    • 采用研磨、抛光的密封面,连续密封性极佳
    • 机械强度高
    • 耐温性高
    • 耐化性高
    • 可灭菌
  • 中央多路插头实现即插即用,可用于所有过程介质
  • 光滑、不易弄脏的设计
  • 所有维护工作均可在现场进行
  • 在过程条件下可便捷更换驱动装置
  • 旋风冲洗能实现极佳的清洁效果
  • 冲洗空腔,确保测量值不失真,并改善卫生状况
  • 搭配 Uniclean 900/Unical 9000,可防止拆卸传感器
  • 出色的传感器浸入长度
  • 统一的传感器长度 (225 mm)
  • 提供专用版本,用于带耐压液体电解质的电极(适用于带电解质储罐的 250 mm 传感器)
  • 与介质接触的外壳体材料为 PVDF 或 PEEK,碳纤维增强
  • 使用光学传感器测量(Ø 12 mm 或 1/2“)

使用陶瓷密封与过程隔离的伸缩式连接件,可实现出色的测量回路可用性。用于在高粘度、磨蚀性、含纤维或者阻塞性的过程介质中进行测量。

无磨损的过程隔离和伸缩式连接件的模块化构造,可在运行过程中拆卸驱动装置,以及随后校准、清洁和更换传感器。尤其是搭配自动清洁与校准系统,Ceramat 可以实现出色的测量回路可用性,同时维护工作量极小。也十分适合使用光学传感器进行测量。

我们期待您的来信
联系我们

技术细节

与介质接触的材料: PEEK, PVDF
产品类型: 伸缩式连接件
产品系列: Ceramat
传感器和适配器: pH传感器, pH 传感器 Ø12 mm 带压缩空气供应装置, 传导式电导传感器, 光学传感器 Ø12 mm 带 PG 13.5 接头, 氧传感器
是否防爆: Ex
Operation: for cCare

下载

操作说明书

[4312] User Manual
Ceramat WA150
Version 07
[14210] User Manual
ZU 1043 Sensor Adapter 360/Ceramat
Version 01
[14135] User Manual
ZU 0654/* & ZU 0655 (Adapters for Additional Media)
Version 02
[14120] Quickstart Guide
ZU 0631 (Standard media connection for operating the Ceramat WA 150(X) / WA 160(X)) & ZU 0646 (Manual control unit)
[13385] User Manual (DE, EN)
ZU 0987 (PG 13.5 Closure Plug for Sensor Lengths of 120 / 225 mm)
Version 02

小册子

[13692] Brochure
Ceramat - Tough as They Come.
Retractable fittings for extreme conditions. With ceramic sealing to the process.

数据手册

[4270] Data sheet
Ceramat WA150
Product Description | Specifications | Product Range

证书

[8078] EU Declaration of Conformity (DE, EN, FR)
No. EU201221C | 2020-12-21
Ceramat WA150-N..., WA153-N..., WA154-N..., WA160-N...
[12749] EU Declaration of Conformity (DE, EN, FR)
No. EU201119A | 2020-11-19
Ceramat WA 150-X..., WA 153-X..., WA 154-X..., WA 160-X...
[8623] EU Type-Examination Certificate
Nr. KEMA 04ATEX4035X | 2020-03-18
Type Ceramat WA 15...-X… | WA 16...-X | WA 13…-X

我们的服务

在工艺或应用中使用

测量发电厂烟气脱硫过程中的预洗涤塔、中和塔和石灰洗涤塔中的 pH 值。
制糖过程对 pH 传感器有着极高的要求。在甜菜洗涤过程中,就已需要监测 pH 值,并根据 pH 测量值定量加入石灰。

相关产品

Maintenance Service For Your Fitting At Knick
商品编码:

In-House-Service-Fittings

On-Site-Maintenance Service For Your Fittings
商品编码:

On-Site-Service-Fittings

相关的博客文章

Stack and String Voltage Measurement in Electrolyzers and Fuel Cells

Voltage, current and temperature measurement in electrolyzers with P40000 series high voltage transducers

适用于 Knick 变送器的新型 30 mV 分流电阻

Knick 从现在起为其高压变送器的附件产品系列增添具有 30 mV 电压降的分流电阻
Innovations at InnoTrans 2024

Innovations at InnoTrans 2024 for rolling stock and DC traction power supply

At InnoTrans 2024 Knick presents electrical measurement solutions for rolling stock and DC traction power supply applications

Knick Austria - direct customer contact in Austria from 2024

Reorganization of sales in Austria and new contacts in the field of process analytics and interface technology

Energy storage - the handshake between renewable energy and electric vehicles

Energy storage technology such as battery and hydrogen are critical for growth and continuous development of renewable energy and e-mobility.

P52000VPD 电压检测器能够可靠检测高达 4200 V 的直流电压

新型电压检测器 P52000VPD (Voltage Presence Detection) 能够可靠监控高压应用领域,在达到指定阈值时向下游设备控制器发送信号。

Knick Interface at Battery and Electric & Hybrid Vehicle Technology Expo

Knick will be showcasing high-voltage electrical measurement and signal conversion products.

VariTrans A20340 – 仅需一个隔离放大器的标准信号倍增

The A20340 can output a standard input signal to four calibrated and galvanically isolated outputs in parallel.

Electrical measurement and process analytics for hydrogen production

Knick products optimize hydrogen production in the process and in electrolyser operation.

Condition Monitoring of High-Voltage Motors

Having an active predictive maintenance campaign in place for large rotating equipment can be a key strategy for maximizing process uptime.

Pulse frequency conditioner for speed sensors

The new P16000 from Knick is a pulse frequency conditioner that converts frequency signals from speed sensors into standard signals.

全球最小传感器,高达±2200 V

Knick的VariTrans P 40000系列能对从±50 mV到±3600 V的电压,以及从±100 mA到±20 kA的电流进行可靠测量。经过验证的ProLine系列现在已经扩展到包含传感器P42000D2,它安装在Din导轨上,模块设计紧凑,测量高达2200 V的直流电压。

宽范围电源对于直流电气测量的重要性

Knick生产的众多直流电气测量产品都包含通用的,也称为宽范围电源。这意味着它们将工作在一个相对较宽的电压范围窗口内,如20…253V,交流或直流。

Measuring Photovoltaic Degradation

Photovoltaic (PV) array degradation is an important aspect to consider for system design and installation.

Electrical Measurement Solutions: Control from 480 to 4800 Volts

Voltage and current transducers from Knick bring true control to electrical measurement applications across a wide-range of industries.

Benefits of High Voltage Transducers versus Instrument Transformers

When a need arises to step voltage in a circuit either up or down for purposes of power transmission or distribution, there is no doubt that transformers are essential.

分流器和霍尔效应的技术对比

在许多系统中,为了确保性能和安全,需要测量较大的直流电流。两个例子是静态励磁和轨道牵引动力。这些电流的测量通常采用两种主要原理之一:配有mV级变送器的分流器电阻或霍尔效应传感器来反馈。

MTBF beyond 3000 years: A snap hook for your plant

Failure of equipment on the plant floor can lead to considerable and costly disruption.

Knick Products Comply With UL - What Does That Mean?

There are different assessments and approaches to reach an adequate level of safety. Manufacturers are typically on the “safe” side, if they comply with recognized standards.

High-voltage transducer offers more safety on railway vehicles

The requirements placed on railway vehicles have increased significantly in recent years. Products for rolling stock need to ensure a higher level of functional safety than ever before.

True RMS Measurement with P41000TRMS

Traditional millivolt AC transducers are very susceptible to errors due to their poor insulation and are only designed for pure sinewave measurement.

Functional safety and maximum availability can go together

The requirements on operational and safety-related circuits are continuously growing.